Fireplace insert installers serving homes in Dillard Park
Wood inserts that meet EPA 2020 emission limits, installed with the clearances and hearth protection their manuals set.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Conditions we see before an insert goes in
- Little warmth from an open fire
- An insert chosen before measuring
- Rusty panels on an old insert
- A hearth too short for an insert
Jump to
Our approach to fireplace insert installation in Dillard Park
Clean and check the chimney before relining
Insert and liner instructions both call for the existing chimney to be cleaned and checked before the liner goes in. Soot, deposits and loose debris can block the liner's path or hide damage in the flue. Starting clean also gives a true picture of the masonry.
We clean the flue as a separate step and look for cracked, loose or missing masonry along the way. What we find is explained before the liner work continues. If a repair is needed, it is priced on its own, and the relining waits until it is finished.
The hearth extension stays noncombustible
In front of an insert, the hearth extension must be made of noncombustible material, as insert manuals state. Wood trim, laminate or carpet laid over part of it breaks that protection. Embers and heat reach farther from a loading door than many people expect.
We check the whole hearth area, including any trim along its edges. If a wood edge or floor covering sits where the manual requires noncombustible material, we explain what needs to change. Rugs belong beyond the protected zone once the insert is in use.
Checking the liner on the manual's schedule
Insert manuals call for the chimney connector and chimney to be checked regularly during the burning season and cleaned when deposits build up. The liner makes that inspection more predictable, because it has a known size and a smooth surface from top to bottom.
Our maintenance visits include the liner, the cap, the connector and the insert's baffles and gaskets. How often you need a visit depends on how much and how you burn. We note what we find each time so changes are easy to track.
Measuring the chimney for the liner
The liner has to run the full height from the insert collar to the chimney top. We measure that height from the top and check for offsets in the flue that a flexible liner has to follow. The measurement sets the liner length ordered.
A flexible liner can follow gentle bends in a masonry flue, provided the flue is large enough along its whole length. Where a section is too tight, we explain the options before anything is ordered. The liner length and route are recorded in your written record.
Insert items you approve before work in Dillard Park
- Metal tag fixed to the fireplace
- Faceplate panels and insulation strips
- Daily cover for the open chimney top
- Removal of an old insert if present
Your fireplace insert questions in Dillard Park
Can any fireplace take a wood insert?
No. Many insert manuals require a masonry fireplace in sound condition, and some forbid factory-built fireplaces outright. The opening also has to meet the model's minimum size. The free inspection answers the question for your fireplace.
Can the insert connect to my home's air conditioning ducts?
No. Insert manuals warn against connecting to any air distribution ductwork unless the manual approves it specifically. The insert heats the room it sits in, and its flue gases go only up the liner.
Does the insert blower need its own outlet?
The optional blower plugs into a grounded outlet near the fireplace. If none is suitable, an electrician adds one as a separate item. We coordinate the location so it suits the manual and is easier to reach before the faceplate goes on.
More Ways to Care for Your Fireplace
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo