Top sealing damper installation for homes in Dillard Park

Round flue, stainless liner or square tile, the damper and its adapter are matched to it.

Owned and run locally
Available for same-day service
Fully licensed and insured
Family owned and run

Choosing a chimney top damper in Dillard Park

A damper that closes the flue at the top

A top sealing damper is a hinged lid mounted on the top of the flue. A gasket around its edge presses against the frame when it is shut. A cable runs from the lid down through the flue to a handle inside the fireplace, so you open and close it from the room.

Because it closes the flue at the top rather than just above the firebox, the whole flue sits behind the seal when it is shut. Rain, leaves and animals stay out, and so does outside air. When the lid is open, the flue works as it did before.

Choosing the side for the handle

The handle goes on whichever side of the firebox you find easier to reach. If you are right-handed and the fireplace sits in a corner, one side may be much more practical than the other. The instructions leave that choice to the owner.

We ask before drilling. Think about where furniture sits, where you stand to light a fire and who else in the house will use it. The handle should be reachable without leaning far into the firebox, and a quick test pull before we leave confirms that it is.

Looking at the flue before closing its top

A top damper closes the flue from above, which makes the flue easy to forget afterward. Before fitting one, we look at the visible flue for cracks, gaps and deposits. The tile top the frame will sit on gets the same attention.

If something in the flue needs attention, we tell you before the damper goes on. Repairs inside the flue are separate items with their own descriptions. You can decide on them knowing that the damper will cover the top and make that area harder to reach later.

A lid that taps or rattles in wind

A properly set damper sits firmly shut. Tapping at the top of the flue on windy days often means the lid is not pulled down tight. The lug may have slipped, or the hinge may have worn.

Note when you hear it and whether the handle is locked at the time. We check the lug setting, the gasket and the hinge. Often a small adjustment fixes it. If the hinge has worn loose, a replacement part or damper may be needed, and we explain which.

What your top damper estimate covers in Dillard Park

Fireplace type and fuel confirmed
Other flues on the chimney identified
Old hardware and debris hauled away
Workmanship warranty on the installation

Before you add a top damper in Dillard Park

Will a top damper lower my cooling or heating bills?

One maker's instructions say a closed damper keeps conditioned air from escaping up the flue. We do not promise a savings figure, because that depends on the house and how the fireplace is used. We recommend a damper for fit and function.

Will the open lid slow the smoke leaving the chimney?

A properly sized damper should open wide enough not to choke the flue, and some designs are made to sit clear of the smoke path when open. We check the lid opening against the flue and tell you what we found.

What should I mention when I call about a damper?

Say whether the fireplace burns wood or anything else, what your current damper does or fails to do and whether anything else vents through the chimney. That lets us plan the visit to your home in Dillard Park.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Chimney & Fireplace Brands We Work With

DuraVent
Olympia Chimney and Venting
Copperfield Chimney Supply
Rutland
Heatilator
Heat & Glo