Wood insert installation with a full-length liner, Hillsboro Beach
A wood insert turns an open fireplace into a closed room heater, and we plan that change carefully with you.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a wood insert starts to make sense in Hillsboro Beach
- An open fireplace you want to heat with
- A second appliance sharing the flue
- No floor protection in front of the unit
- Mortar gaps inside the firebox
Jump to
How we plan an insert for your fireplace in Hillsboro Beach
Protecting the hearth during installation
An insert is heavy and has sharp metal edges. One maker's manual asks installers to protect the hearth extension with a heavy blanket or cardboard while the unit is moved into position. Tile, stone and finished floors are easy to chip at this stage.
We lay protection over the hearth and along the path to the fireplace before the insert comes in. Floors in the rest of the room are covered where we work. Any debris from the job is cleaned up and taken away when we leave.
Getting to know the insert's air control
Most inserts have a primary air control that sets how fast the fire burns. Opening it gives a hotter, faster fire, and closing it slows the burn. Manuals describe starting with the air fully open, then adjusting once the fire is established.
We show you the control on your insert and how it relates to the settings the manual describes. We also explain the manual's warnings about turning the air down too far, too soon. A steady, well-managed fire burns cleaner and keeps the glass clearer.
When the door stops sealing tightly
The door gasket compresses over time, and the latch may need adjusting to keep the seal tight. Manuals describe that adjustment and the gasket replacement when the rope wears out. A door that no longer seals lets air in around the fire and makes it harder to control.
We check the gasket and latch during maintenance visits and explain what the manual allows owners to adjust. Replacement gasket comes from the parts list for your model, fixed with the adhesive the manual names. A good seal keeps the air control doing its job.
How we explain what the inspection finds
After the free inspection, we explain what we found in the fireplace, the chimney and the hearth, and what it means for an insert. Findings are separated into what must be done before installation, what is advisable and what can wait. Nothing is presented as urgent unless it is.
You receive the written estimate with those items listed separately. If a finding is concealed or uncertain, we say what we could see and what we could not. You then decide on the scope with a clear picture of the fireplace.
Parts of the insert job the estimate separates
- Masonry repairs as separate items
- Liner insulation where instructions require
- Damper removed or secured open
- Hearth protected during installation
What people ask about wood-burning inserts
Do I need a liner all the way to the chimney top?
Current insert manuals call for a continuous liner from the insert's collar to the top of the chimney. The old masonry flue then encloses the liner rather than carrying the smoke. We include the liner as part of the installation, not as an extra.
What if my chimney already has a liner from an older insert?
We check whether the existing liner matches the new insert's size, runs the full height and belongs to a listed system in good condition. If it does, we explain that option. If not, a new liner is listed as a separate item.
Will someone need to inspect the insert before we use it?
That depends on the job and the jurisdiction. Insert manuals advise asking local building or fire officials about installation inspections. If one is required, we explain when it happens, and the first fire waits for it.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo