Fireplace insert installers serving homes in Miami Springs
A wood-burning insert installed to its manual, with a continuous liner from the collar to the top of the chimney.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Reasons to consider a wood insert for your fireplace
- An open fireplace you want to heat with
- Soot on the face above the opening
- A faceplate that no longer seals
- A second appliance sharing the flue
Jump to
Wood insert installation decisions, one at a time
When the existing fireplace is factory-built
A factory-built fireplace is a listed system, and the code requires it to be used under that listing. Adding an insert changes how it works, so the fireplace's own listing and the insert's manual both have to allow the pairing. Many do not.
If your fireplace turns out to be factory-built, we read both labels and explain what they allow. Where the answer is no, the realistic paths are a different appliance or a replacement fireplace, and we explain both. We do not force a pairing the listings exclude.
Getting the liner past the damper
The liner has to pass through the throat of the fireplace, where the damper plate and frame sit. Manuals say that if the damper control will be out of reach once the insert is in, the damper must be removed or fixed in the open position. A closed damper would block the liner's path.
We explain what will happen to your damper before work starts. Sometimes the plate comes out, sometimes it is secured open, depending on the fireplace and the manual. Either way, the change stays in place while the insert is installed, and it is written into the scope.
Clearances to side walls, facing and trim
Every insert label lists minimum clearances to combustible materials around it, such as side walls, the top facing and trim beside the opening. Those distances are measured from the unit, not from the old fireplace opening. Wood paneling or trim that was fine beside an open fireplace may now be too close.
We measure the combustible materials around your fireplace against the label of each insert you are considering. Where trim is too close, we explain whether it can be moved or replaced with noncombustible material. That work is a separate item, and it happens before the insert is installed.
Why a smoldering fire causes trouble
Running an insert too low for long periods produces a smoldering fire. Manuals warn that a slow, cool fire leaves more deposits in the liner and dirties the glass, and one prefers a small hot fire to a large smoldering one. The air control has a practical lower limit for good burning.
We explain how to judge a good burn by the flames and the glass, and how to use the air control without choking the fire. If you want a long, gentle burn, we discuss what the manual says about loading for it. Deposits in the liner are then easier to keep in check.
What your insert installation scope lists
- Opening height, width and depth measured
- Noncombustible hearth extension check
- Blower outlet coordination with an electrician
- No link to other flues or ductwork
Common questions about liners and wood inserts
How is the discount for booking quickly applied?
If the insert and liner are approved while fewer than 72 hours have passed since your free inspection, 10% comes off what you agreed. Nothing about the discount asks you to decide before we have looked at the fireplace, since the clock begins at your own inspection.
How often does an insert need a maintenance visit?
It depends on how much and how you burn. Manuals ask for regular checks of the chimney connector and liner during the burning season. Our maintenance visits cover the liner, cap, baffles, gasket and glass.
What kind of wood should we burn in the insert?
Dry, split, seasoned natural wood, as the manual specifies. Treated or painted wood, garbage, cardboard and colored paper stay out. We explain how to judge dryness at handover, including with a simple moisture meter.
More Ways to Care for Your Fireplace
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo