Wood-burning insert installation for homes in South Miami Heights
Insert, liner, faceplate and floor protection are written as separate items, so you can see what the job includes.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What leads to a fireplace insert installation in South Miami Heights
- A worn insert with a warped door
- Drafts from an open damper
- No floor protection in front of the unit
- Mortar gaps inside the firebox
Jump to
Insert, liner and hearth, planned together in South Miami Heights
Checking the liner on the manual's schedule
Insert manuals call for the chimney connector and chimney to be checked regularly during the burning season and cleaned when deposits build up. The liner makes that inspection more predictable, because it has a known size and a smooth surface from top to bottom.
Our maintenance visits include the liner, the cap, the connector and the insert's baffles and gaskets. How often you need a visit depends on how much and how you burn. We note what we find each time so changes are easy to track.
The discount tied to your free inspection
Approving the insert installation within 72 hours of your free inspection brings 10% off the agreed work. The window starts from your own inspection, not from a date on a calendar we choose. It applies to the insert, the liner and the other items you approve together.
You are free to take longer and approve later without the discount. We prefer that you understand the scope rather than rush it. If a question stands between you and a decision, ask it, and we answer before the window closes.
Starting a fire in a new insert
Insert manuals describe a start-up routine. The air control goes fully open, and crumpled paper and small kindling go in with a few larger pieces arranged so air can move. The door then stays slightly open for a short time before it is closed. The aim is a hot bed of coals before the main load.
We walk through the routine for your model at handover. A cold insert should be warmed gradually, and manuals warn against a roaring fire in a cold unit. A good start keeps smoke out of the room and the glass clearer.
Reloading without smoke in the room
Opening the door of a burning insert can let smoke roll out if the draft is weak. Manuals describe a simple fix, which is to open the air control fully for a short time, then open the door slowly, a crack first. The fire settles before the door opens wide.
We show you that routine with your insert at handover. Rake the coals, load the wood as the manual shows and close the door promptly. If smoke still escapes during reloading, tell us, because it may point to a draft issue worth checking.
The insert installation scope, line by line
- Liner insulation where instructions require
- Mantel and trim clearance check
- Separate pricing for insert and liner
- Manual and listing details handed over
What people ask about wood-burning inserts
Why does the new insert smell during its early fires?
The high-temperature paint cures during the break-in fires and gives off an odor, which manuals describe as expected. Keep those fires moderate, ventilate the room and set nothing on top of the insert until the curing is done.
How is the discount for booking quickly applied?
If the insert and liner are approved while fewer than 72 hours have passed since your free inspection, 10% comes off what you agreed. Nothing about the discount asks you to decide before we have looked at the fireplace, since the clock begins at your own inspection.
Will someone need to inspect the insert before we use it?
That depends on the job and the jurisdiction. Insert manuals advise asking local building or fire officials about installation inspections. If one is required, we explain when it happens, and the first fire waits for it.
More Ways to Care for Your Fireplace
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo