Factory-built or masonry fireplaces, installed in Dillard Park
An open roof penetration gets covered before we leave each day, and debris leaves the property with us.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Starting points for installing a wood fireplace in Dillard Park
- Renovation plans that include a fireplace
- An exterior chase that needs a new unit
- Old chimney pipe with separated joints
- Framing too close to the old unit
Jump to
What a new fireplace installation involves in Dillard Park
An outside air supply for the fire
The Florida Building Code asks for an exterior air supply to fireplaces unless the room is mechanically ventilated and held at neutral or positive pressure. For a factory-built unit, the duct for outside air must be a listed component installed to the maker's instructions.
We plan the outside air path together with the chimney path. It needs its own opening through a wall or into a ventilated space, and its own termination hood. The route, the hood and the damper control appear on the estimate so you can see what the supply involves.
A ferrous damper worked from inside the room
The code calls for a damper made of ferrous metal in every masonry fireplace. It sits above the opening, and you must be able to work it from inside the room. Closed, it shuts the flue when the fire is out, and it opens fully while a fire burns. Its position also affects the throat proportions.
We specify the damper in the proposal and show you how to operate it at handover. Some owners prefer a damper at the top of the flue, which is a different product with its own instructions. We explain the choice and whether it replaces or joins the throat damper.
Corner, flat wall or room divider layouts
Factory-built fireplaces can be set flat against a wall, across a corner, in an exterior chase or, for some models, as a room divider open on more than one side. Each layout changes the framing, the hearth extension and the clearances. The manual shows which layouts that model allows.
Tell us the layout you have in mind and we check it against the manuals of suitable models. A corner layout may save floor space, while an exterior chase keeps the room wall flat. We explain the construction each one needs before you settle on the look.
Lighting a fire the way the manual describes
Manuals describe a lighting routine that avoids a smoky start. Open the damper fully, place crumpled paper under the grate, build a small tent of kindling and warm the flue with a burning roll of paper before lighting. Add larger split wood only once a bed of embers forms.
We go through the routine at handover with your own fireplace, so it feels familiar. A good start reduces smoke in the room and deposits in the chimney. If the routine does not work in your house, that tells us something about the draft worth checking.
Installation items you approve before work begins in Dillard Park
- Chase framing for an exterior chimney
- Removal of a failed prefab unit
- Damper type and operation check
- Debris cleanup and haul-away
New fireplace questions, answered plainly
Can a fireplace go in a room with no chimney today?
Often it can. A factory-built unit brings its own listed chimney, which runs up through the house or an exterior chase. The free inspection shows whether the joists, attic and roof give that chimney a workable path in Dillard Park.
Will the building official need to see the work?
That depends on the job and the jurisdiction. Fireplace manuals tell owners to ask local building or fire officials about inspections before work begins. We explain what may apply to your project and keep walls open until any required check is done.
Can the chimney run up an outside wall of the house?
Yes, inside a properly built chase. Manuals ask for the chase to be framed and sealed like an outside wall, with false ceilings and firestops as it rises. The chase, its cladding and its top are priced as separate items.
More Ways to Care for Your Fireplace
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo