A new wood-burning fireplace, installed in Richmond Heights
Factory-built or masonry, the choice follows your room, the structure and the chimney path, not a showroom photo.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Situations that lead to a new wood fireplace
- A prefab unit with a warped firebox
- Old chimney pipe with separated joints
- An old unit that fails its listing
- An enclosure too small for newer units
Jump to
Masonry and factory-built installation, side by side
Why a straight chimney path helps
Factory-built chimneys can bend around framing with listed offset sections, but the code and the manuals limit how many bends there may be and how steep they are. Each offset adds joints, supports and places where the path can go wrong. A straighter route is easier to build and to service.
We plan the route to use as few offsets as the house allows. When an obstacle forces a bend, the offset parts come from the same listed system. The estimate states how many offset sections the route needs, so you know why the parts list looks the way it does.
What the listing label on a unit tells you
Every factory-built fireplace must carry a listing label, and the code requires installation under the conditions of that listing. The label names the maker, the model and the standard it was tested to. It points to the manual that holds the clearances, framing sizes and approved parts.
We read the label and the manual before we price anything. If you already own a unit, look for the label or the paperwork and share the model when you call. That detail lets us bring the right questions to the free inspection instead of general guesses.
What we look at during the free inspection
For a new fireplace, the free inspection covers the room, the floor structure and the wall you prefer. It also covers the ceiling and attic framing, the roof exit and the side of the house for outside air. For a replacement, we add the old unit, its chimney, the enclosure and the hearth.
You leave the visit knowing which options fit and what each would involve. The written estimate follows with separate items and no commitment. Tell us about any drawings, plans or model preferences beforehand, so the visit covers them.
Planning a second fireplace in the house
A second wood fireplace needs its own complete system. Each factory-built unit has its own listed chimney, and each masonry fireplace has its own flue. Connecting two fireplaces to one flue is not an option in these designs.
Tell us where both fireplaces would go, even if the second is years away. Planning the routes together can avoid a chimney path that blocks the other later. We price the fireplaces separately, so you can build one now and keep the plan for the next.
What we confirm before a new fireplace is ordered
- Removal of a failed prefab unit
- Surrounding finish boundaries for other trades
- Debris cleanup and haul-away
- Grate, screen and supplied accessories check
Asked before a fireplace installation in Richmond Heights
Can a fireplace go in a room with no chimney today?
Often it can. A factory-built unit brings its own listed chimney, which runs up through the house or an exterior chase. The free inspection shows whether the joists, attic and roof give that chimney a workable path in Richmond Heights.
Will the building official need to see the work?
That depends on the job and the jurisdiction. Fireplace manuals tell owners to ask local building or fire officials about inspections before work begins. We explain what may apply to your project and keep walls open until any required check is done.
Do you set the tile or stone around the opening?
Only if the estimate names it. Often the finish belongs to a tile setter or mason. Either way, we mark the noncombustible zones and the mantel limit so whoever sets the finish works to the manual.
More Ways to Care for Your Fireplace
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo