Fireplace installer for wood-burning fireplaces in West Flagler
From footing to flue, a masonry fireplace follows the Florida Building Code's fireplace chapter step by step.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Worn prefab units and empty walls we plan around
- Renovation plans that include a fireplace
- An old unit that fails its listing
- Chimney parts from mixed brands
- Unused wood fireplace ready for replacement
Jump to
Before, during and after your fireplace installation
Picking the roof exit for the chimney
A chimney that exits near the highest part of the roof deals with less wind interference. Manuals also ask for the termination to stay clear of trees, taller walls and uneven roof lines. Those recommendations can shift the ideal position for the fireplace inside the room.
We look at the roof from outside and from the attic before settling the location. If a nearby roof section sits higher than the planned exit, the chimney may need more height or a different spot. We explain both options and what each adds to the job.
Supporting the chimney weight in the framing
Where a factory-built chimney is carried by joists or rafters, the code requires those members to be designed for the added load. Tall runs may also need wall supports or roof supports from the chimney maker. The supports are listed parts, installed at the heights the manual allows.
We check the framing that will carry the chimney and plan the listed supports. If a joist needs reinforcing, that carpentry is written as its own item. You see where the weight goes and what holds it, rather than trusting it to work out.
Corner, flat wall or room divider layouts
Factory-built fireplaces can be set flat against a wall, across a corner, in an exterior chase or, for some models, as a room divider open on more than one side. Each layout changes the framing, the hearth extension and the clearances. The manual shows which layouts that model allows.
Tell us the layout you have in mind and we check it against the manuals of suitable models. A corner layout may save floor space, while an exterior chase keeps the room wall flat. We explain the construction each one needs before you settle on the look.
Coordinating the roof opening with roofing work
Cutting a chimney through the roof affects the roof covering around it. The chimney maker's parts seal the penetration, but the surrounding tiles, shingles or membrane may need a roofer's attention. Any warranty your roofer gave on the roof is also worth checking first.
We explain which part of the roof work we complete and which part belongs to a roofer. If a roofer is needed, the estimate shows it as coordination with its own line. Scheduling the two trades in the right order keeps the opening covered and dry.
Items we price separately for a new fireplace
- Chimney route from firebox to roof
- Roof opening and termination cap
- Debris cleanup and haul-away
- Break-in fire guidance at handover
Questions about installing a new fireplace in West Flagler
Which suits my house, a factory-built or a masonry fireplace?
It depends on the structure, the room and how you plan to use the fire. Masonry needs a footing and more time, while a factory-built unit is framed in and follows its listing. We explain both for your house after the inspection.
Will the building official need to see the work?
That depends on the job and the jurisdiction. Fireplace manuals tell owners to ask local building or fire officials about inspections before work begins. We explain what may apply to your project and keep walls open until any required check is done.
Do you set the tile or stone around the opening?
Only if the estimate names it. Often the finish belongs to a tile setter or mason. Either way, we mark the noncombustible zones and the mantel limit so whoever sets the finish works to the manual.
More Ways to Care for Your Fireplace
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo