Your new fireplace in West Park, installed to its listing
Wood-burning fireplace installation for homes in West Park, with the maker's instructions followed from rough framing onward.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Room and chimney conditions behind new fireplace plans
- Cracked panels in a worn-out unit
- Chimney parts from mixed brands
- A fireplace that cannot be repaired safely
- No outside air for the fireplace
Jump to
The engineering behind a new fireplace in West Park
Map the joists before choosing the wall
A factory-built fireplace sends its chimney straight up through floors, ceilings and the attic. Where it lands relative to the joists and rafters decides how much framing must be cut and headed off. A spot a little to one side can mean far less structural work.
We check the ceiling framing and the attic along the proposed path during the free inspection. Tell us about attic access, stored items and any ductwork up there. What we find goes into the estimate as its own framing item, so you can see its effect on the plan.
Taking out a failed prefab unit
Removing a worn factory-built fireplace means disconnecting it from its chimney, freeing it from the framing and carrying it out without damaging the room. The old chimney sections usually come out too, because they belong to the old listing. Debris from the removal is cleaned up and hauled away.
We protect floors and furniture along the path before anything is lifted. Once the unit is out, the empty enclosure shows its real condition. We explain what that reveals, such as water staining or charred framing, before the replacement goes any further.
If smoke drifts into the room after installation
Smoke that escapes into the room usually has a simple cause. Manuals list a damper not fully open, too little air reaching the fire, exhaust fans running, a blocked cap, wet wood and a chimney that is too short. Most of these can be checked quickly.
Start with the damper and the fans, then look at the wood you are burning. If the problem continues, stop using the fireplace and tell us. We check the draft, the cap and the air supply against the manual and explain what we find.
What the installation includes and leaves out
A typical wood fireplace installation from us includes planning, framing the enclosure, setting the unit, the listed chimney and roof parts, the hearth extension, outside air and handover. A masonry build adds the footing, firebox, smoke chamber and flue. The estimate states exactly which of these apply.
Left out, unless the estimate names them, are electrical circuits, roofing beyond the penetration, the finish face, the mantel and painting. Those boundaries are written so nothing falls between trades. Ask about any item you expected to see.
What we confirm before a new fireplace is ordered
- Masonry fireplace footing and firebox plan
- Electrical coordination for a blower kit
- Debris cleanup and haul-away
- Written record of the completed installation
Fireplace installation questions raised in West Park
Who handles the wiring for a blower or fan kit?
An electrician. We place the electrical box where the manual shows while the framing is open, and the electrician runs any new circuit under the electrical code. The estimate shows that work as a coordinated item.
Can the chimney run up an outside wall of the house?
Yes, inside a properly built chase. Manuals ask for the chase to be framed and sealed like an outside wall, with false ceilings and firestops as it rises. The chase, its cladding and its top are priced as separate items.
Can chimney parts from another brand be used to save money?
No. A factory-built fireplace is tested with specific chimney parts, and substituting another brand breaks its listing and can void the warranty. We use only the parts the fireplace manual names, from the firebox to the termination cap.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo