Fireplace Repair in Biscayne Park, starting with a free inspection
We check the damper, firebox, hearth and face, then explain what can be fixed and what should wait.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Wood and masonry fireplace faults we trace
- Soot marks above the opening
- Screen that no longer closes
- Cracks at the corners of the opening
- Water pooling in the firebox after rain
Jump to
Fireplace Repair from the firebox to the damper
Handling ashes safely after a fire
Ashes can hold live embers long after the fire looks out. Federal wood-burning guidance says to put them in a covered metal container and keep it outdoors on a surface that will not burn. Wait until the firebox is cold before you start.
Ash left piled against the grate or the back wall also hides the firebox floor. Clear what you safely can before our visit, or leave it and tell us. We would rather see the firebox as it is than have you rush the cleanup while embers may still be warm.
What sits behind the walls of a masonry fireplace
The code keeps wood framing and other combustibles a set distance from a masonry fireplace, with the gap left open except for fireblocking. That space is hidden once the wall is finished. Heat damage to paint or trim on the wall around the fireplace can hint at a problem there.
We do not open walls to check clearances without your approval. We explain what we can see, what we cannot, and what an opening would tell us. If a closer look is needed, it is a separate item with its own price and a plan for closing the wall again.
The strip around the opening must not burn
The area right around a fireplace opening has to be noncombustible, with combustible trim kept back. Brick industry guidance describes surrounds of tile, stone, brick or similar material. Wood or plastic trim creeping into that area is a common finding after redecorating.
We point out anything combustible near the opening and explain the requirement. Removing an unsuitable piece is simple; replacing it with noncombustible material may be a separate item. The choice of finish is yours, as long as it meets the rules for its position.
Cleaning a masonry face without harming it
Soot on a brick or stone face can often be cleaned, but harsh methods can damage the surface. Brick industry guidance favors the gentlest method that works, tried first on a small test area. Strong acids and high-pressure water are poor choices for an indoor fireplace face.
If you want the face cleaned as part of a repair, we list it as a separate item with the method. Cleaning follows the repair that stopped the smoke, not the other way round. That keeps the finish from being stained again by the same fault.
The free inspection behind a fireplace fix
- Listing label and model noted
- Grate condition and fit
- Refractory panel condition noted
- Workmanship warranty on the repair
Before you book fireplace repair in Biscayne Park
Can you tell whether my fireplace is masonry or factory-built?
Usually, yes. We look at the opening, the firebox lining, any label and the way the unit meets the wall. If the type cannot be confirmed from the room, we say so and explain what would settle it before any part is chosen.
What happens if my fireplace runs on gas?
Faults with lighting, flame or controls belong to our gas fireplace repair service, which works from the appliance's service manual. The firebox, damper or hearth around gas logs can still be handled as fireplace repair, on a separate line of the estimate.
Can you look at the damper behind my gas logs?
Yes. The damper and firebox around gas logs are fireplace parts. The log manual decides the damper setting, and we check that it can be held there. Faults in the logs or their controls go to our gas services.
More Ways to Care for Your Fireplace
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo