Fireplace Repair and service for Three Lakes fireplaces
Tell us what the fireplace is doing, and we explain which repair fits and which service handles the rest.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Wood and masonry fireplace faults we trace
- Loose or missing firebrick
- Grate bent or sagging
- Warped metal inside the unit
- Cracks at the corners of the opening
Jump to
How we approach wood fireplace repair
Reaching parts hidden behind the surround
Some fireplace parts can be reached through the opening. Others sit behind a surround, a panel or a finished wall. We say which is which before work begins, and how any finish that must come off will be protected and put back.
If a part can be reached only through a finished surface, that becomes a separate decision. You may choose to open it now, later or not at all. The estimate lists that access as its own item so you can see its cost apart from the repair it allows.
What sits behind the walls of a masonry fireplace
The code keeps wood framing and other combustibles a set distance from a masonry fireplace, with the gap left open except for fireblocking. That space is hidden once the wall is finished. Heat damage to paint or trim on the wall around the fireplace can hint at a problem there.
We do not open walls to check clearances without your approval. We explain what we can see, what we cannot, and what an opening would tell us. If a closer look is needed, it is a separate item with its own price and a plan for closing the wall again.
Keeping the fire inside the firebox
Logs that hang over the front of the grate or lean against the walls put flame where the fireplace was not built to take it. The firebox lining, the damper and the face above the opening all suffer. The maker's manual often describes how to lay the fire.
Smaller loads placed on the grate burn more cleanly and are gentler on the fireplace. If the fireplace has been run with oversize fires, tell us. It helps explain a cracked lining, heat marks on the face or a warped damper, and it shapes our advice after the repair.
Listed accessories and how they are used
The code requires listed fireplace accessories to be installed and used according to their listing and the maker's instructions. That covers fittings such as screens and similar items across the opening. An accessory bought without checking the fit can change how the fireplace draws.
We check what is fitted and whether it suits the opening. If an accessory is causing a problem, we explain what to change. Our part is the fireplace itself, kept safe to use with the accessories it already has.
Fireplace Repair lines you can approve one by one
- Fireplace type and fuel confirmed
- Access plan for concealed parts
- Materials named for each repair area
- Return-to-use instructions
Before you book fireplace repair in Three Lakes
Do you look at electric fireplaces on a repair visit?
An electric unit has its own repair service because the faults are electrical, not combustion related. Tell us whether the heat or the flame effect stopped. If a new circuit is needed, we explain that the wiring is a job for an electrician.
Can you replace a damaged screen on a factory-built unit?
Where the maker still supplies the screen or its parts, the replacement comes from that list. We check the model on the label first. If the part is no longer made, we explain the options before ordering anything.
Why do you ask what I burn in the fireplace?
What goes into the fire affects wear. Wet wood, scrap, painted wood and liquid starters each leave their own marks on the firebox and damper. Knowing what was burned helps us read the damage and advise on use afterwards.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo