Fireplace refurbishing and restoration in Bay Point
A fireplace restoration in Bay Point starts with a free inspection and a written plan you can read.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When patching an old fireplace stops working
- Rust on the lintel or firebox metal
- Firebox floor worn or broken
- Earlier repairs that keep failing
- A face darkened by old fires
Jump to
What restoring a fireplace involves
Refilling open firebox joints
Open joints between firebricks let heat reach the masonry behind the lining. The building code limits how wide those joints may be and calls for a refractory mortar to fill them.
We clear loose material from the open joints and refill them with a heat-rated mortar, following the product instructions. Joints are kept tight and neat so the lining works as one surface. Where a joint has opened because a brick has moved, the brick is reset first. The finished joints are left to cure before any fire, as the mortar's instructions require.
Clearing the smoke shelf
Behind the damper sits the smoke shelf, a ledge that catches what falls down the flue. In a fireplace left alone for years, that shelf can hold a thick layer of debris.
We clear the shelf as part of restoring the damper area. A buried shelf can stop the damper from opening and can feed a smoky fire. Once it is clear, we can see whether the shelf itself is cracked. Any shelf repair is described separately, with the method and the reason.
Tile surrounds around the opening
Tile surrounds frame many fireplace openings. Heat and age can loosen tiles, crack glaze and open grout joints.
We reset loose tiles and replace broken ones with the closest match we can find. Grout is refilled in a material that suits the heat near the opening. If the original tile is no longer made, we explain the choices before removing anything. A tile surround is often the most visible part of a restoration, so we treat it with the same care as the brick.
Small fires to cure new work
Some heat-resistant fireplace mortars finish curing with heat. One maker calls for air drying first, then a low fire, before the fireplace is used at full strength.
We give you the curing steps for the products we used. Following them lets the new joints harden properly. Skipping them risks cracks in fresh work. If you are unsure about any step, ask us before lighting the fire rather than after. We would rather explain twice than repair the same joint again.
What the free restoration inspection checks
- Debris bagged and hauled away
- Separate notes on chimney-side findings
- Free written estimate before any work
- Grate size and position checked
Brick fireplace restoration questions
When can I light a fire after the restoration?
Once the new mortar has dried and cured as its maker directs. Some heat-resistant mortars call for small fires before full use. We tell you how long to wait and how to build those early fires.
Is the restoration covered by a warranty?
Our workmanship warranty covers the work we carried out. If a repair we made does not hold, tell us and we come back to look. We explain what the warranty covers for your job before you approve.
Can you tell whether my fireplace is masonry or factory-built?
Yes, during the free inspection. The difference matters, because a masonry fireplace is repaired with masonry methods while a factory-built unit must stay within its listing and use the manufacturer's parts.
More Ways to Care for Your Fireplace
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo