Direct-vent and B-vent gas fireplace installation in Boulevard Gardens
Clearances, framing and finishes follow the manual for your model, so service access survives the finish.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a gas fireplace installation makes sense
- Unsure where a vent could exit
- A builder asking for framing details
- Several trades working on one room
- Cabinetry planned around the fireplace
Jump to
Choosing, framing and venting a gas unit
The electrical supply the model needs
Many gas fireplaces need household power for the ignition module, a blower or lighting. The manual states the requirement, and some models call for a circuit that is not controlled by a wall switch. Others can run their controls on batteries.
We read the electrical requirement during planning and mark where the supply must arrive at the appliance. Where the position has no suitable circuit or outlet, an electrician provides one. We coordinate the timing, so the power is in place before the walls close and before the unit is commissioned.
Leak check at the appliance connection
Once the supply is connected to the appliance, every fitting at the unit is checked for leaks. Manufacturers call for a non-corrosive leak check solution, applied with the gas on, at each connection the installer made.
We check the connections at the appliance and record the result. If a leak shows at a fitting on the supply side, the gas contractor is told before the unit runs. The appliance is not lit until every fitting at the unit has passed.
Inserts and log sets have their own services
A gas insert slides into an existing fireplace and vents through liners, and a gas log set sits in a working wood fireplace. Both are gas appliances, but their planning, venting and requirements differ from a built-in gas fireplace.
We handle inserts and log sets under their own installation services. If your plan involves an existing fireplace opening, tell us, and we start with the service that fits. This installation service is for new vented gas fireplaces framed into a wall, a chase or a new opening.
Sealing upstairs air leaks for a natural-draft unit
Air leaking out of the upper parts of a house can pull air in lower down and work against a natural-draft fireplace. One manual lists recessed lights, attic hatches and leaking ducts among those leaks, and it suggests sealed light cans, sealed hatches and taped duct joints.
We point out those conditions when a natural-draft model is on the table. Sealing work belongs to the builder or the air handling trade, and we do not price it as fireplace work. If the conditions make natural draft doubtful, we explain why a direct-vent unit may suit the house better.
Items in a gas fireplace installation
- Vent route checked against the vent tables
- Control and service access planned
- Appliance set, leveled and secured
- Restrictor set for the vent configuration
Questions about installing a gas fireplace
What if the wall I want has no room for the vent route?
We look for another route or another position that fits the vent tables and termination rules. If no permitted route exists for that wall, we say so plainly and suggest positions that do work.
Is a decorative gas fireplace different from a heater-rated one?
Yes. Vented decorative fireplaces are listed to ANSI Z21.50, while vented fireplace heaters are listed to ANSI Z21.88. If warmth matters as much as the look, we point you toward heater-rated models during selection.
Can a gas fireplace be added to a room with no fireplace?
Often, if a permitted vent route and a suitable framed enclosure can be created. The project inspection tells you whether your chosen position works and what construction it needs before anything is ordered.
More Ways to Care for Your Fireplace
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo