Repairing the hearth in front of the fire in Belle Meade
Our workmanship warranty applies to the hearth work we do, and its terms are explained at handover.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Hearth surface and support faults we find
- A split through a stone slab
- White powder on hearth bricks
- A raised hearth that flexes when sat on
- Metal hearth strip missing at the unit
Jump to
Hearth finishes in tile, brick and stone
Edge pieces and trims at the hearth border
The border of a hearth takes knocks from feet, vacuum cleaners and furniture. Edge tiles, bullnose pieces and trim strips are often the first parts to chip or come loose.
We check how the edge is formed and fixed. Replacing a chipped edge piece is a contained repair. If the edge is loose along its length, the base under it may have moved away from the rest of the hearth. We explain which it is and how the edge will meet the room floor afterwards.
A hearth crack that returns after each repair
If a crack comes back in the same place after a repair, the surface was not the problem. Something beneath it is still moving, whether the base, the support or the floor structure around it.
Tell us about each earlier repair and how long it lasted. We look for the reason the crack keeps returning before suggesting anything. Where the cause cannot be found from the surface, we explain what opening a section would reveal. Another surface patch is not offered as a lasting fix.
Setting tile close to the heat
The adhesive under a hearth tile sits near the fire and takes heat with every use. One factory-built fireplace maker recommends unmodified thinset for tile near its units because of the temperatures involved. Product directions set the rest.
We name the setting material on the estimate and follow its directions for mixing, coverage and curing. Tiles that failed because they were stuck down with an unsuitable adhesive are lifted, the old bed is cleaned off and the base is checked. Laying new tile on the same failed bed would repeat the fault.
When a hearth needs no repair at all
Not every mark on a hearth is a fault. A fine, stable crack in a slab, a worn sheen on stone or grout darkened near the opening may need nothing more than cleaning or watching.
When that is what we find, we say so plainly and do not write up work to fill the visit. The findings still go in writing, with the details worth watching, so a later change can be compared against the condition we recorded. If the hearth needs nothing, the free inspection has still told you something useful.
Hearth repair scope for homes in Belle Meade
- Combustible material under the hearth checked
- Sealed joint between the unit and hearth
- Setting material named for the finish
- Written record listing hearth materials
Your hearth questions, in plain terms
How long after a hearth repair can we light a fire?
The setting materials decide that, and each product's directions differ. We tell you when the hearth can be walked on, when heavy items can go back and when fires can resume. The written record notes any curing steps still running.
Can a rug sit on top of the hearth?
The hearth extension is meant to stay clear and noncombustible across its whole area. A rug over it sits exactly where embers land. Keep rugs off the hearth and back from its edge, and move them before our visit so we can see the whole surface.
What does the workmanship warranty cover on hearth work?
It covers the hearth repair we carried out, meaning the surface we laid or reset and the base work we did. Parts of the hearth or floor we did not touch fall outside it, and we explain the terms when the job is finished.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo