Hearth and hearth tile repairs in Kendale Lakes
Hearth repair in Kendale Lakes that respects both the fireplace behind it and the floor around it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the hearth needs more than grout
- Cracks running across several tiles
- A crack back after an earlier repair
- Chipped or loose edge pieces
- Rug or laminate covering part of the hearth
Jump to
Hearth repair that starts with the cause
Slate hearths that flake or split
Slate is a noncombustible stone often used for hearths. It is layered by nature, and over time surfaces can flake or thin sheets can lift, especially near the opening or where heavy items are dragged.
A flaking area on an otherwise sound slate hearth may be left and watched, or the piece replaced. A slate that has split through or rocks on its bed needs taking up. We check the bed beneath and discuss matching slate, which can vary in color and thickness from one source to another.
Concrete hearths with cracks or broken edges
Cast concrete hearths can crack across their width or break at the front edge. Fine shrinkage cracks are common and often stable. Cracks that open, step or come with a loose edge are a different matter.
We check whether the concrete is sound around the crack and whether it is moving. Broken edges can often be rebuilt with a repair material suited to the location. A slab that has cracked through and dropped may need a section replaced, and the estimate explains which route fits.
Wood-grain tile laid as a hearth
Porcelain or ceramic plank tile printed with a wood grain is still a noncombustible finish. It can serve as a hearth surface where the rules for that fireplace allow a tile finish on a proper base.
Two cautions apply. For a factory-built fireplace, the code wants the hearth extension readily distinguishable from the floor, so tile that matches the flooring beyond it may not pass. Real wood, laminate or vinyl printed to look like tile does not count as hearth material. We check which you have before any repair is planned.
A hearth by a fireplace you rarely light
A hearth in front of a fireplace that is seldom used still takes feet, furniture and cleaning. Cracks and loose edges develop whether or not a fire is lit.
If you plan to start using the fireplace again, the hearth should be checked against the fireplace it serves before the next fire, not only for looks. Where the fireplace will stay out of use, the repair can focus on a safe, sound floor surface. Tell us which you intend, because the right scope differs between the two. We write down which way the repair was planned, so a later change of mind starts from the facts.
Hearth materials and steps in writing
- Surface tapped for hollow areas
- Base condition beneath the finish
- Combustible material under the hearth checked
- Optional sealing on its own line
Worth knowing before a hearth repair
Will you tell me if my hearth only needs cleaning?
Yes. If the marks are soot or heat staining and the surface is sound, we say so and do not write up a repair. Cleaning can be listed as its own item, using the gentlest method that works, tried on a small area first.
Should new flooring go down before or after the hearth repair?
Usually after. Repairing or extending the hearth first keeps the protected area where the fireplace needs it and avoids cutting back a new floor later. Tell us your flooring plans early so the order is settled on the estimate.
What does the written record say after a hearth repair?
It notes what was replaced on the surface, the work carried out beneath it, the materials used and their source, and any setting time still running. It also lists what we saw but did not touch.
More Ways to Care for Your Fireplace
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo