
Brick, stone and tile hearth repair across Navarro Isle
The hearth in front of your fireplace is repaired as a noncombustible surface that still does its job.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Hearth cracks and loose pieces to mention
- A crack back after an earlier repair
- Loose stones on a raised hearth
- A hearth that looks short for the opening
- Metal hearth strip missing at the unit
Jump to
The hearth finish, base and support
Framing under a raised hearth for a factory-built unit
Where a factory-built fireplace sits on a raised platform, its manual may require the hearth framing to be noncombustible, such as metal framing topped with the specified board. Wood framing close under the hearth can breach that requirement.
If a raised hearth sounds hollow, flexes or has cracked along a line, the framing beneath may be the reason. We explain what the manual expects and what we can see. Opening the platform to check the framing is priced as a separate step, with your approval first.
Flooring installers and the hearth edge
When new flooring goes in around a fireplace, the flooring installer and the hearth meet at the edge. Problems arise when the floor is laid too close to the opening or tucked under the hearth.
If you are planning new flooring, call us before it is laid. We can explain where the hearth edge must stay and whether the hearth needs repair or extension first. Getting the order right avoids cutting back a new floor later to make room for the protected area.
A hearth by a fireplace you rarely light
A hearth in front of a fireplace that is seldom used still takes feet, furniture and cleaning. Cracks and loose edges develop whether or not a fire is lit.
If you plan to start using the fireplace again, the hearth should be checked against the fireplace it serves before the next fire, not only for looks. Where the fireplace will stay out of use, the repair can focus on a safe, sound floor surface. Tell us which you intend, because the right scope differs between the two. We write down which way the repair was planned, so a later change of mind starts from the facts.
Keeping track of a hearth crack
If you are not ready to repair a crack, watching it gives useful information. Mark each end lightly with a pencil and note the date. Check it now and then to see whether it has grown or whether one side has dropped.
A crack that stays the same is often a surface matter. A crack that lengthens, widens or steps suggests continuing movement beneath, and that changes the repair. Bring your notes to the visit. They can save an opening step, because they show us the movement we could not watch ourselves.
The hearth scope you approve
- Joint with the firebox floor
- Metal hearth strips where the manual requires
- Sealed joint between the unit and hearth
- Workmanship warranty on the hearth work
Worth knowing before a hearth repair
Can you replace a single cracked hearth tile?
Often, if the base under it is sound and a matching tile can be found. We tap the surrounding tiles first. A line of cracks or hollow areas nearby points to the base, and then a single new tile would crack again.
Why does the crack in my hearth keep coming back?
Something beneath the surface is still moving, whether the bed, the base, the support or the floor around it. A new tile or fresh grout over that movement copies the crack. We look for the cause and explain how it could be confirmed.
How does the inspection discount work for hearth repairs?
Save 10% on the hearth lines you approve, provided you book them within 72 hours of your free inspection. The hours run from your own inspection visit rather than from your call. If you decide later, the estimate keeps its written price.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
