Cracked hearth and tile repair in Pinecrest
Our family-owned team protects your floor, repairs the hearth you approved and hauls the debris away.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Tile, stone and brick hearth warning signs
- A crack back after an earlier repair
- Scorch marks reaching the floor beyond
- Slate flaking near the fireplace opening
- A dark joint that stays damp
Jump to
The hearth finish, base and support
Framing under a raised hearth for a factory-built unit
Where a factory-built fireplace sits on a raised platform, its manual may require the hearth framing to be noncombustible, such as metal framing topped with the specified board. Wood framing close under the hearth can breach that requirement.
If a raised hearth sounds hollow, flexes or has cracked along a line, the framing beneath may be the reason. We explain what the manual expects and what we can see. Opening the platform to check the framing is priced as a separate step, with your approval first.
Opening a small section to check the support
Sometimes the surest way to learn why a hearth keeps cracking is to lift part of it. Taking up a few tiles or a small area of brick shows the bed, the base and sometimes the support itself.
We choose the spot that will tell us the most with the least disturbance. The opening is protected while it is open and made good afterwards, or folded into the repair if you go ahead. The cost of that step is shown on its own line before we begin.
Getting the hearth ready for our visit
Clear the hearth of plants, baskets, log holders and decorations, and move any rug in front of it. Let the fireplace go cold, ideally with no fire the day before.
Leave loose tiles or pieces where they are, and do not try to lift anything that moves. If you have spare tiles, an old invoice or a manual for a factory-built unit, set them out. They help us match materials and read the construction. Clearing a route through the room lets us lay floor protection before any tools come in.
Wood-grain tile laid as a hearth
Porcelain or ceramic plank tile printed with a wood grain is still a noncombustible finish. It can serve as a hearth surface where the rules for that fireplace allow a tile finish on a proper base.
Two cautions apply. For a factory-built fireplace, the code wants the hearth extension readily distinguishable from the floor, so tile that matches the flooring beyond it may not pass. Real wood, laminate or vinyl printed to look like tile does not count as hearth material. We check which you have before any repair is planned.
Hearth surface, base and edge on the estimate
- Setting material named for the finish
- Extension added where the hearth falls short
- Dust kept near the work area
- Usable spares left with you on request
Hearth support, size and finish explained
What if wood was left under my hearth when it was built?
The code says combustible material must not remain against the underside of a hearth. If the signs suggest it, we explain what opening a small section would show and price that step first. Any wood found is removed as part of the repair you approve.
Can the fireplace be used before the hearth is repaired?
Sometimes. A cracked tile on a sound base rarely stops fires. Missing pieces, loose edges near the opening or gaps into a void below should stop them. We give you a direct answer on the visit and explain the reason.
What should I move off the hearth before the visit?
Plants, baskets, log holders, decorations and any rug in front of it. Let the fireplace go cold, and leave loose pieces where they are. Set out any spare tiles, an old invoice or the manual for a factory-built unit.
More Ways to Care for Your Fireplace
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo