Stucco repairs that blend into chimneys in Pinecrest
Upfront pricing and no hidden fees on stucco chimney repair, with every item listed.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco warning signs on homes in Pinecrest
- Damp marks indoors beside the chimney
- Crumbling stucco close to the ground
- Cracks that return after painting
- Weep screed buried under soil or paving
Jump to
Getting chimney stucco right in Pinecrest
Tapping stucco to map the loose areas
Stucco that has lost its bond often sounds hollow when tapped. Bulging or cracked areas are the obvious place to start, and the tapping then shows how far the loose material reaches around them.
The hollow zone is frequently larger than the visible crack. We mark it out before quoting, so the repair size in the estimate reflects the loose area rather than the crack alone. Where a section is out of reach during the free inspection, we tell you and explain how its condition may change the scope.
Reading the lines of a stucco estimate
A clear stucco estimate separates the work into parts you can judge on their own. The repair area, the base repair beneath it, the coats, the finish and any painting each appear as their own lines.
Work on another component, such as the chimney top or the roof flashing, is listed separately with its own price. So is any exploratory opening. You can approve the whole scope or only part of it. Nothing is added without a conversation first, and our pricing is set out upfront.
Stucco repair alongside a roof project
If the roof around the chimney is due for replacement, the timing of the stucco work matters. Flashing, the stucco edge at the roof and the roof covering all meet at the same line.
Tell us about any planned roof work when you arrange the inspection. It may make sense to coordinate so the flashing and stucco details are finished together, rather than disturbed twice. We explain which parts of that junction are ours and which belong to the roofing contractor. Coordinating also avoids cutting new flashing into fresh stucco.
Lath and beads in salty air
Zinc-coated steel loses its coating sooner where the air carries salt from the sea. Published corrosion data puts warm marine air close to industrial air for galvanized steel, with wind and distance from the shore moving the rate.
Lath, corner bead and weep screed near the coast therefore deserve a close look during a stucco repair. Where they are corroded, we replace them with a material suited to the exposure and explain the choice. The estimate names the metal used for each accessory.
Included in a stucco chimney assessment
- Removal of failed stucco and old patches
- Leveling coat brought to the wall plane
- Moist curing between coats
- Written record of the stucco work
Asked about stucco patches and finishes
Will the repaired stucco match the rest of the chimney?
Texture can usually be matched closely. Color is harder on unpainted stucco, because the old surface has weathered. We explain the likely result before you approve, and we can make small samples so you can judge the match yourself.
Are hairline cracks in the finish worth repairing?
Many are surface matters that a thin slurry or paint can close. We still tap around them and check whether they line up with anything behind the plaster. If both checks are clean, the repair can stay small.
Can you repair the stucco if the chimney top also leaks?
We can, but the top should be dealt with first or at the same time. A patch below a leaking top tends to fail early. The top repair is listed separately, and we explain the order before you approve anything.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo