Hearth repair that starts beneath the surface in Roosevelt Gardens
Loose edges and lifted tiles are made safe underfoot, with setting times explained before the fireplace is used.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Hearth problems you can see and feel
- Cracks running across several tiles
- Chipped or loose edge pieces
- A hearth that looks short for the opening
- Metal hearth strip missing at the unit
Jump to
Keeping the hearth doing its protective job
A hearth that has dropped or tilted
A hearth that slopes toward the room, sits lower than it did or has pulled away from the fireplace face has moved on its support. Gaps at the back edge and cracks at the corners often come with it.
Movement like this is a support problem first. We check how the hearth is carried and whether the movement is continuing. Relaying the surface without dealing with the support will not hold. The estimate explains the support repair and the surface repair as separate items, in the order they must happen.
Loose stones on a raised hearth
Raised hearths built from natural stone are laid in mortar, and individual stones can loosen as the mortar ages or the bed shrinks. Stones at the corners and front edge take the most knocks.
A loose stone is taken up, its bed cleaned and the stone reset in mortar suited to it. Where several stones have loosened together, the core of the platform may have moved, and we check before resetting. The estimate lists stones by position so you can see where the work goes.
The order of a hearth replacement
A replacement starts with protection of the room, then removal of the old finish and base. The support is checked and any combustible material left beneath is removed.
The new base goes down, followed by the finish and its joints or grout, and then the edge where the hearth meets the floor. Setting times are observed between stages. The work finishes with cleanup, a walk-through and the written record of the work. If support work is needed, it comes before any new base is laid.
Damp rising through a slab-mounted hearth
On a ground-floor slab, moisture from below can reach a hearth set directly on it. Signs include white deposits, loose tiles and grout that stays dark.
We look for those signs and for any matching damp in the floor around the hearth. Where damp comes from below, the fix may be outside the hearth, and we say so. The hearth repair then uses materials suited to the conditions and is scheduled once the moisture question is answered. Sealing over damp without dealing with it tends to push the problem somewhere else.
What the free hearth inspection looks at
- Grout and mortar joints checked
- Support type identified where visible
- Base condition beneath the finish
- Setting material named for the finish
What people ask about cracked hearths
Do factory-built fireplaces need a special kind of hearth?
They need the hearth extension their listing calls for. The manual may set an insulating base, metal hearth strips and a sealed joint at the unit. We read the model label and check the hearth against that manual before planning a repair.
Can you repair a marble hearth that has cracked?
Often. We check whether the piece rests evenly and whether the crack is stable. A replacement needs a match in color and veining, which can take time to find. For a factory-built unit, the layers under the marble must still meet the manual.
Do you handle the flooring around the hearth too?
Only the edge where the hearth meets the floor, when that is named in the scope. Damage further into the room floor is its own item or a job for a flooring installer. The estimate states where our work stops.
More Ways to Care for Your Fireplace
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo