Hearth and hearth tile repairs in Sailboat Bend
Save 10% on hearth work you approve inside 72 hours of the free inspection at your home.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Hearth cracks and loose pieces to mention
- A split through a stone slab
- A raised hearth that flexes when sat on
- Rug or laminate covering part of the hearth
- Loose bricks along the hearth border
Jump to
The hearth finish, base and support
Hearth edges and small children
Hearth corners and raised edges sit at the height of small children. Chipped edges and loose corners can cut or pinch. Loose pieces at floor level are also easy for small hands to pull at.
If you have young children at home, mention it. We look closely at the edges and suggest how the repaired edge can be formed so it is sound and smooth. Edge guards are a household choice; our part is making sure the edge beneath them is solid. We also check that no gap at the edge could trap fingers once the repair is finished.
Breaking out an old hearth
Removing an old hearth makes noise and dust. Brick, stone and tile are broken out in pieces and carried away, and the base beneath may need cutting.
We plan the removal to protect the fireplace face, the firebox floor and the surrounding floor. Dust is contained near the work and debris is cleaned up and hauled away. Should removal expose a route into the chimney, we cover it before leaving at the end of each work day. We tell you in advance which days will be noisy, so you can plan around them.
Carrying ash across the hearth
Ash removal happens over the hearth, so spills and dropped embers land on it first. EPA advises putting ashes in a covered metal container and keeping that container outdoors, away from the house.
Set the container on the hearth itself while you fill it, not on the rug or the floor beyond. Use a metal shovel and move slowly near chipped edges or loose tiles. If ash has been working into open grout or cracks, tell us, because warm ash in a gap can reach whatever lies beneath. The repair closes those gaps.
Keeping track of a hearth crack
If you are not ready to repair a crack, watching it gives useful information. Mark each end lightly with a pencil and note the date. Check it now and then to see whether it has grown or whether one side has dropped.
A crack that stays the same is often a surface matter. A crack that lengthens, widens or steps suggests continuing movement beneath, and that changes the repair. Bring your notes to the visit. They can save an opening step, because they show us the movement we could not watch ourselves.
The hearth scope you approve
- Hearth size checked against the opening
- Edge pieces and trims inspected
- Finish material and matching options
- Firebox and surround items listed separately
What people ask about cracked hearths
What if wood was left under my hearth when it was built?
The code says combustible material must not remain against the underside of a hearth. If the signs suggest it, we explain what opening a small section would show and price that step first. Any wood found is removed as part of the repair you approve.
Should new flooring go down before or after the hearth repair?
Usually after. Repairing or extending the hearth first keeps the protected area where the fireplace needs it and avoids cutting back a new floor later. Tell us your flooring plans early so the order is settled on the estimate.
Is it safe to sit on a raised hearth?
A sound raised hearth is built to carry its own weight and the loads placed on it, including people sitting on the edge. Loose capstones or corners are a different matter. Keep off loose sections until they are reset, and mention them when you book.
More Ways to Care for Your Fireplace
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo