Hearth extension repairs for homes in Upper Eastside
A cracked or loose hearth is checked at the surface and beneath it before any tile, stone or brick is replaced.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Hearth surface and support faults we find
- Cracks running across several tiles
- A crack back after an earlier repair
- Loose stones on a raised hearth
- A gap opening at the fireplace face
Jump to
Hearth work planned around the fireplace it serves
Flooring or finishes laid over the extension
A hearth extension has to stay noncombustible across its whole area. Laminate, vinyl, wood or carpet laid over part of it reduces the protected zone, even if the brick or tile is still there underneath.
If a finish has crept onto the hearth during a renovation, we point it out and explain the requirement. Removing it may be simple. Where it was glued down or trimmed into place, the estimate lists its removal and the repair of the hearth surface beneath as their own items.
Dust, debris and the finished hearth
Taking up tile, stone or brick makes dust and debris close to living space. Before starting, we cover the surrounding floor and furniture and set up to keep dust near the hearth.
Old material, offcuts and packaging are cleaned up and hauled away. We clean the new surface once it can be touched and leave the area ready to use as soon as the setting times allow. If the work runs over more than one day, the area is left safe and covered between visits.
Setting tile close to the heat
The adhesive under a hearth tile sits near the fire and takes heat with every use. One factory-built fireplace maker recommends unmodified thinset for tile near its units because of the temperatures involved. Product directions set the rest.
We name the setting material on the estimate and follow its directions for mixing, coverage and curing. Tiles that failed because they were stuck down with an unsuitable adhesive are lifted, the old bed is cleaned off and the base is checked. Laying new tile on the same failed bed would repeat the fault.
The hearth edge and your floor in Upper Eastside
In Upper Eastside homes, as anywhere, the edge where the hearth meets the room floor takes daily wear. We check how it is formed, whether it is firm and whether the floor stops where it should. Chipped edge pieces and loose trims are the usual findings.
Edge repairs are listed separately from the hearth surface, and any work on the floor itself is named as its own item or left to a flooring installer. You see where our work stops before anything begins.
What a hearth repair estimate lists
- Finish material and matching options
- Loose units lifted and reset
- Damaged tile, brick or stone replaced
- Written record listing hearth materials
Hearth questions from homes in Upper Eastside
Do factory-built fireplaces need a special kind of hearth?
They need the hearth extension their listing calls for. The manual may set an insulating base, metal hearth strips and a sealed joint at the unit. We read the model label and check the hearth against that manual before planning a repair.
Should new flooring go down before or after the hearth repair?
Usually after. Repairing or extending the hearth first keeps the protected area where the fireplace needs it and avoids cutting back a new floor later. Tell us your flooring plans early so the order is settled on the estimate.
Are hairline cracks in a concrete hearth a concern?
Fine shrinkage cracks are common in concrete and are often stable. Cracks that widen, step or come with a loose or dropped edge are different, and they point to the base or support. We check which kind you have before suggesting any work.
More Ways to Care for Your Fireplace
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo