Chamber repair above the damper for homes in Coral Ridge
Damper, firebox and flue findings are listed separately, so the chamber estimate stays clear.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Reasons to have the chamber in Coral Ridge assessed
- Stepped brick visible above the damper
- A smoky smell after the fire is out
- Water streaks on the chamber walls
- Loose mortar at the base of the flue
Jump to
Smoke chamber work and the rules behind it
Smoke escaping into the masonry
Open joints and cracks in the chamber walls can let smoke and hot gases pass into the brickwork around the chamber. Construction guidance names this leakage as one reason the chamber is parged. Heat and deposits then reach places they should not.
We look for gaps, cracks and missing mortar during the assessment. Where we see them, the estimate explains how the repair closes them. Areas we cannot see behind the damper or above it are described as hidden rather than assumed sound.
Cracks in the chamber walls
Cracks in the chamber walls can come from heat, from movement in the masonry or from an earlier chimney fire. The cause matters, because a crack that keeps moving will reopen through a coating. A crack that lines up with one outside the chimney is noted as well.
We look at the size, direction and number of cracks and at any matching cracks nearby. Stable hairline cracks may be filled as part of parging. Wider or active cracks are explained as a structural question before any coating is proposed.
Finding a chamber problem and fixing it
An inspection identifies what is wrong in the chamber; a repair addresses it. Our free inspection is where we find and explain the problem, and the repair is what you approve afterwards from a written estimate. Keeping the two steps apart lets you judge the diagnosis before any work is agreed.
Findings from a full chimney inspection done elsewhere are welcome at the visit. We compare them with what we see. The chamber estimate focuses on the chamber, and other findings are listed separately so none of them gets lost along the way.
Factory-built fireplaces have no masonry chamber
Chamber parging applies to site-built masonry fireplaces. A factory-built fireplace is a listed metal assembly, tested to its own standard and installed to the conditions of that listing. Its smoke path is formed by manufactured parts, not by corbeled brick and mortar.
If your fireplace is factory-built, refractory mortar has no place above its firebox. Repairs follow the manufacturer's instructions and use the parts it specifies, which is prefab fireplace repair, a separate service. We confirm which kind of fireplace you have before any chamber work is discussed.
Your free inspection of the smoke chamber
- Damper position set for curing
- Rebuild extent described where needed
- Cap recommendation noted where missing
- Open chimney top covered at day's end
Common questions about chamber parging
How soon can I use the fireplace after chamber repair?
That follows the curing steps for the product used. One maker asks for the new surface to air cure with the damper open before a small conditioning fire, and for fires to stay small for a while after. We give you the steps in writing.
Will you repair the damper while working on the chamber?
Only if you approve it. Damper repair or replacement is a separate service with its own price. If the damper has to come out for access, the estimate states how it is refitted afterwards, whether or not you choose damper work.
Are fine cracks in new parging a problem?
One chamber coating maker describes fine surface crazing after curing as of no functional concern. Wide cracks, loose sections or gaps opening at the flue are different. If you see those, stop using the fireplace and tell us.
More Ways to Care for Your Fireplace
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo