Stone veneer chimney repair in Cutler Bay, backing first
We check the weep screed, flashing and barrier behind stone veneer, not just the stones.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Where stone chimneys tend to show wear
- Thin gaps around individual stones
- White deposits washing out of the joints
- Stains inside near the fireplace wall
- A stone face pulling away from the wall
Jump to
Stone chimney repair in plain terms
Joint profiles that match the stone around them
Mortar joints are finished in different ways. They may sit flush with the stone, be recessed, be rounded or be struck at an angle. The profile changes how the chimney looks and how water runs off each joint.
We match the existing profile unless it is shedding water badly, in which case we explain the alternative before starting. Joints are tooled once the mortar is firm enough to hold a shape, as the manufactured stone installation guide describes. Tooling too early smears the stone, and too late leaves a rough joint.
The weep screed along the bottom of stone veneer
On a framed wall, adhered stone usually ends at the bottom on a weep screed. The industry guide holds that edge clear of the roofing, ground or paving below, so water can leave and the stone stays out of standing water.
A weep screed buried under roofing, mortar or soil stops working. We check its condition and its clearance. If it needs to be freed or reset, the stones above it may have to come off and go back, and the estimate says so in plain terms.
Deciding on the stone work after your inspection
After your free inspection, you have time to consider the estimate. Book the stone work within 72 hours of that inspection, and 10% comes off the service. The discount applies to whatever scope you approve. The window counts from your own inspection date, whenever that falls.
If you need longer, take it, because the window affects only the discount. The estimate, its line items and the reasoning behind them stay the same. Ask us to go through any item again before you decide, including the options you are unsure about.
Chimneys that mix stone and brick
Some chimneys use stone on the lower part and brick or another material above, or brick at the corners and the top. Each material has its own repair methods and its own mortar needs. Brick and stone may also need different mortars, which matters where they share a joint.
This service covers the stone. Brick work belongs to our masonry repair service and is priced as its own item. Where the two materials meet, we plan the joint so both repairs finish cleanly together and water is not trapped at the change.
Pieces of a stone chimney repair scope
- Agreed removal of loose or displaced stones
- Raking deteriorated joints back to sound mortar
- Separate line for crown, cap or cover work
- Final review of joints, edges and blend
Stone repair answers for homes in Cutler Bay
Do you cover open areas if the work takes more than a day?
Yes. Before we leave each day, any area where stones are off is sheltered from rain, and removed stones are stored safely until they go back. Loose debris goes with us rather than staying on the roof.
Is there a warranty on stone chimney repair?
Our work carries a workmanship warranty. We explain its terms with the estimate, and the written record of the work lists which stones were reset, which were replaced and which joints were repointed.
When is a hose water test used on a stone chimney?
Selectively, when the job calls for it, meaning the water route is still in doubt and the answer would change which joints or stones we repair. Many stone jobs never need one, and we explain what it would show first.
More Ways to Care for Your Fireplace
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo