Chimney stone reset and repointed in Highland Beach
Stone chimney repair in Highland Beach with mortar chosen to suit the stone, not simply the strongest mix.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stone damage you may spot from the ground
- Stones missing from the chimney face
- Flaking layers on the face of a stone
- Caulk or foam from earlier quick fixes
- Plants growing out of the joints
Jump to
The thinking behind each stone repair
Caulk and foam left by earlier repairs
Caulk, foam and construction adhesive sometimes appear in stone joints after quick fixes. They seal the surface but not the joint, and they take the place of the mortar that belongs there. Caulk also traps water behind it, which can keep the stone bed wet.
We remove those materials before repointing, so new mortar can fill each joint properly. If adhesive has been used to hold stones, those stones are checked and reset in mortar. The estimate lists that removal work separately, because it can take longer than the repointing itself.
The order of work on a stone repair
Water entry at the top or the roof junction is dealt with first. Then loose stones come off, the backing is repaired, and the drainage details at the base are restored where they have failed. Each step waits for the one before it to be sound.
Stones are reset next, joints are filled and tooled, and the mortar cures. Cleaning comes last, once the mortar is hard enough to handle it. The estimate shows that order and notes which steps depend on the weather, so the schedule makes sense before it starts.
Why chimney stone wears faster than wall stone
A chimney stands above the roof and meets weather on every face. Stone and joints there work harder than the same stone on a sheltered wall lower down the house.
None of that reflects a fault in how your house was built, because it is simply where a chimney sits. It explains why the chimney may need attention before other stonework does. It also explains why its top and its flashing matter so much to any stone repair, because they decide how much water reaches the stone in the first place.
Maintenance visits for a stone chimney
A stone chimney benefits from a periodic look at its joints, any loose stones, the top and the drainage edge. A single loose stone found early is a small job, and so is a short run of open joints.
Ask about maintenance visits once your repair is complete. We check the repaired area and the rest of the chimney, then tell you what needs attention and what can safely wait. Visits are booked whenever you want one, and each starts from the record of what we repaired.
Stone chimney tasks priced separately
- Cleaning stone backs and setting surfaces
- Raking deteriorated joints back to sound mortar
- Separate line for flashing work at the roof
- Roots and plants cleared from joints
Common questions on stone repair
What if the backing behind the stone is damaged?
We stop and show you what we found. Backing repair, such as lath, scratch coat or framing work, is priced as its own item. The stone goes back once the surface behind it is sound again.
Do you need roof access to repair a stone chimney?
For most chimneys, yes. The top, the upper stones and the roof junction are reached from the roof. We protect the roof covering, plan safe access and tell you if any area cannot be reached.
Can you repair stone on a framed chimney chase?
Yes, while respecting what the stone hangs on. Stone on a framed chase relies on the sheathing, barrier and lath behind it. If the framing is damaged, that repair comes first as a separate item.
More Ways to Care for Your Fireplace
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo