Chimney stone reset and repointed in Idlewyld
We check the weep screed, flashing and barrier behind stone veneer, not just the stones.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stone and joint problems to point out
- Stains inside near the fireplace wall
- Caulk or foam from earlier quick fixes
- Plants growing out of the joints
- A dark band that stays wet after rain
Jump to
Repairing natural and manufactured stone chimneys
Stones slipping near the bottom of the chimney
Stones near the base of a chimney sit where water collects. If the drainage edge is blocked or buried, the lowest stones stay wet the longest and can loosen before any others do. Soil or mulch piled against the base keeps the lowest stones wet as well.
We check the weep screed or base flashing, the gap to the roofing or ground and the condition of the lowest courses. Freeing the drainage edge is often part of the fix. We list it alongside any stones that need resetting, so you can see why both parts matter.
Cracks running through the stones
A crack running through a stone, rather than around it, can come from movement, a hard knock or stress passed on by the joints. Cracks that line up across several stones point to movement in the wall behind them.
We map the cracks to see whether they form a line. Single cracked stones can be replaced. A line of cracks calls for a closer look at the backing or the structure, which we explain before recommending anything further. Replacing stones along a moving line only moves the crack.
The people who repair your stone
We are a family-owned, locally owned company, and the team that inspects your stone chimney is the team that repairs it. The reasoning behind the estimate stays with the work from start to finish. You also know exactly who to contact if a question comes up after the job.
Ask anything, from why a joint is raked by hand to how a replacement stone was chosen. Good stone repair depends on choices you understand. We would rather explain something twice than leave you guessing about what is happening on your roof.
New work can look fresh at first
Fresh mortar and newly cut or cleaned stone can look brighter than their weathered surroundings. That difference usually softens as the repair is exposed to sun and rain. Cleaning the surrounding stone lightly can also narrow the difference, where the stone allows it.
We keep it small by reusing stones, matching mortar and cleaning carefully. We also tell you what to expect on the day the work is finished, so a fresher look is not mistaken for a mismatch. If the difference still bothers you after it weathers, tell us and we will look again.
What your stone repair estimate covers
- Loose stone mapping across each face
- Cleaning stone backs and setting surfaces
- Tooling joints once the mortar firms up
- Hose water test when the job calls for it
Questions on veneer and natural stone
What mortar do you use for repointing stone?
One chosen for the stone and the assembly. For natural stone, the mortar should not be harder than the stone. Manufactured stone follows its maker's guidance. We explain the choice rather than using one mix everywhere.
Can stone joints be repointed without removing stones?
Often, yes. Worn mortar is raked out to sound material, and the joints are refilled and tooled. Stones come off only when they are loose or when something behind them needs attention.
Can you repair stone on a framed chimney chase?
Yes, while respecting what the stone hangs on. Stone on a framed chase relies on the sheathing, barrier and lath behind it. If the framing is damaged, that repair comes first as a separate item.
More Ways to Care for Your Fireplace
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo