Stone veneer chimney repair in Las Olas Isles, backing first
Original stones are kept wherever they are sound, so the repair blends with the chimney.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the stone on your chimney needs repair
- A section of stone bulging outward
- Damp patches that linger on the stone
- Stains inside near the fireplace wall
- Cracks running through the stones themselves
Jump to
Resetting and repointing chimney stone
Gentle cleaning for chimney stone
The manufactured stone installation guide advises against harsh chemicals such as raw acid, and against wire brushes or power washers, when cleaning adhered stone. National Park Service guidance on masonry cleaning favors the gentlest method that does the job.
We start with water and soft brushes and step up only if needed, testing first in an inconspicuous spot. Cleaning appears on the estimate when the repair needs it, not as a cosmetic extra added to the bill. If a stain will not shift safely, we tell you rather than force it.
Rusted ties behind anchored veneer
The code calls for corrosion-resistant ties in anchored veneer. Where ties rust anyway, they lose strength and the stones they hold can loosen. Rust streaks bleeding from joints can be an early sign. Bowing or a stone that moves when pressed can be another hint.
Ties sit hidden in the joints, so we look for evidence first and suggest opening a small area when needed. Where ties need replacing, suitable replacement anchors are installed as part of a defined repair. The estimate describes the method, the area and what happens if more corrosion turns up.
The joint where stone meets the chimney top
Where stone meets a crown or cover, a clean joint and a drip keep water from running behind the top courses. That junction often opens as the materials expand and contract at different rates. Water entering there can travel down behind several courses before it shows.
We check it on every side. Failed sealant or mortar is removed and replaced with a material suited to both surfaces. If the top above needs work, it is priced separately, and the stone repair is sequenced to meet it so the two finish at a tight, weather-shedding joint.
Acting on the first loose stone
One loose stone is a simple repair. Left alone, it lets water behind the face and can loosen others around it, turning a small job into a larger one. Checking it now and then from the same spot in the yard shows whether it is shifting.
If you spot one, note where it is and whether it has moved since you first saw it. Tell us when you call. We check it during the free inspection and advise whether it needs attention now or can be watched, and we explain the reasoning either way.
What the stone inspection and estimate include
- Cleaning stone backs and setting surfaces
- Tooling joints once the mortar firms up
- Separate line for crown, cap or cover work
- Removal of caulk, foam and failed patches
Common questions on stone repair
Do you seal stone chimneys after a repair?
Only if it suits the stone and its maker allows it. Some sealers trap moisture or darken stone. If a water repellent is appropriate, it goes on after repairs and curing, as its own line on the estimate.
Is there a warranty on stone chimney repair?
Our work carries a workmanship warranty. We explain its terms with the estimate, and the written record of the work lists which stones were reset, which were replaced and which joints were repointed.
Can you repair stone on a framed chimney chase?
Yes, while respecting what the stone hangs on. Stone on a framed chase relies on the sheathing, barrier and lath behind it. If the framing is damaged, that repair comes first as a separate item.
More Ways to Care for Your Fireplace
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo