
Stone chimney repair for a home in Lauderdale Beach
If a perfect stone match is not available, we say so and show you the closest options.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What loose chimney stone can look like
- Caulk or foam from earlier quick fixes
- Plants growing out of the joints
- Loose stones above a door or walkway
- Mortar that powders when scratched
Jump to
Our approach to stone chimney repair
Mortar that gives way before the stone does
Repointing mortar should be softer and more vapor-permeable than the masonry around it. That is the central point of the National Park Service guidance on repointing. If the joint is harder than the stone, stress and moisture move into the stone instead.
Softer stones then crack or flake at their edges while the hard joint stays intact. We choose a mortar suited to the stone on your chimney, and the estimate describes it in plain words. Strength alone is not the goal, because a joint is meant to be the part that wears.
Putting original stones back
The best match for a stone on your chimney is usually the stone itself. Pieces removed with care can often be cleaned and reset. That keeps color, texture and weathering consistent across the repair. Reused stones also carry the same weathering as their surroundings, which new stone cannot copy.
We handle removed stones carefully and store them safely until they go back. Cracked or eroded pieces are set aside and discussed with you before anything is discarded. The written record notes which stones were reused and which were replaced, and where the new ones went.
Stones flaking away in layers
Some natural stones split along their layers when water gets into them, and the face then flakes off in sheets. Hard mortar around a soft stone can make this worse, because moisture escapes through the stone rather than the joint.
We look at how deep the flaking goes. A stone with a sound core may be left in place, turned or dressed back. A badly damaged one is replaced with a matched piece. We also look at the joints around it, since they may be part of the cause.
What a stone chimney inspection covers
A free inspection looks at every face, the corners, the top and how it sheds water, the roof junction and the base. We tap and test stones, look closely at the joints and check the drainage details where they are visible. Any stone that is unsafe is pointed out on the day.
We also ask about interior signs near the fireplace. Afterwards, we explain what we found and what stayed hidden. You receive a free written estimate with each part of the stone work listed separately, and nothing starts until you approve it.
Stone chimney tasks priced separately
- Resetting stones in a full mortar bed
- Joint profile and color matched to existing
- Moist curing of new mortar
- Debris cleaned up and hauled away
What people ask about stone chimney repair
Is there a discount for booking stone work soon after the inspection?
It does. Book the stone work within 72 hours of your own free inspection and 10% comes off that service. Each price on the estimate is shown in full, so the saving is easy to see.
What mortar do you use for repointing stone?
One chosen for the stone and the assembly. For natural stone, the mortar should not be harder than the stone. Manufactured stone follows its maker's guidance. We explain the choice rather than using one mix everywhere.
Is same-day service available for loose chimney stone?
Same-day service is available when the schedule allows, often to assess a loose stone or make an area safe. Resetting and repointing need curing time, so most stone repairs take more than one visit.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
