
Chimney stone repair for homes in Pembroke Park
We check the weep screed, flashing and barrier behind stone veneer, not just the stones.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Joint and stone symptoms that point to water
- Pieces of stone or mortar on the roof
- Cracks running through the stones themselves
- Plants growing out of the joints
- A dark band that stays wet after rain
Jump to
Stone chimney repair on homes in Pembroke Park
Raking out worn joints by hand
Repointing starts by removing deteriorated mortar back to sound material. National Park Service guidance on repointing warns that power tools can chip the edges of masonry units. With stone, a chipped edge cannot be put back. Joints are cleared to a consistent depth so the new mortar has a sound bond on every side.
We rake joints with hand tools where the stone is fragile or irregular, and use careful mechanical methods only where they will not harm it. Each joint is cleaned of dust and dampened before new mortar goes in, so the fresh mortar grips the stone on both sides.
When the chimney itself has moved
If a stone chimney leans, separates from the house or shows cracks running through many courses, the problem may be bigger than loose stones. That kind of movement is a structural question. Signs worth mentioning include a gap opening between chimney and wall, or cracks that grow.
We say so clearly when we see it. Rebuilding or structural work is a separate service with its own assessment. Stone repairs can wait until that is settled, so they are not undone by further movement. We would rather tell you early than repair a face that is still shifting.
Keeping you informed on curing days
Some days on a stone job are spent letting mortar cure, with nobody on the roof. We mark those days on the schedule we give you, so a quiet day does not look like a forgotten job. You can also ask where things stand at any point and get a straight answer.
Rain or an unexpected finding can shift the plan, and we call you when it does. Any face still open stays sheltered in the meantime. The record you receive at the end lists the work in the order it was done.
A look from the attic side
On a stone-clad framed chase, the attic can show whether water is getting behind the stone. Stained framing or damp sheathing next to the chase is a clear signal that the drainage behind the stone has failed. Dry framing is useful news as well, because it narrows the search.
Where the attic is safely accessible, we ask to look, without disturbing insulation near the chimney pipe. What we find there helps decide where to lift stones, if we need to lift any at all, and keeps the exploratory work to the smallest useful area.
Stone repair items you can approve
- Cleaning stone backs and setting surfaces
- Repointing with mortar suited to the stone
- Unused brackets and fixings removed or sealed
- Roots and plants cleared from joints
Questions on veneer and natural stone
Why is water getting in behind the stone on my chimney?
Common routes include the top, open joints, the roof junction and a blocked drainage edge at the base. We check each one and, when the job calls for it, use a hose water test to confirm the route.
Can I keep using the fireplace during exterior stone work?
Exterior stone work seldom affects the fireplace. Where a repair reaches the chimney top or the inside of a framed chase, we say whether fires should wait until that section is closed up again.
Why did stones on my chimney come loose?
Common causes include poor mortar coverage behind the stones, water in the backing, corroded lath or ties, and movement. The stone that came off often shows which cause applies, so we look closely at its back.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo

