Stone veneer chimney repair in Sunrise, backing first
Our team matches joint color, width and profile so repaired areas sit quietly beside the old work.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stonework changes worth a closer look
- A stone that moves when touched
- Caulk or foam from earlier quick fixes
- Plants growing out of the joints
- Gaps where the stone meets the chimney top
Jump to
Stone, mortar and water, handled in order
When several stones loosen in one area
A cluster of loose stones usually points to something behind them. The lath may have corroded, the scratch coat may have lost its grip, or water may have soaked the backing over a long period.
In that case we suggest removing the loose group, checking the surface behind it and repairing that surface before any stones go back. Resetting stones one by one over a failing base tends to repeat the problem. The estimate shows the backing repair as its own line, apart from the stone work.
Where the cut edges end up
Stones often need trimming to fit a gap. A fresh cut shows a different color and texture from the finished face, especially on manufactured stone, where the color is concentrated near the surface.
We place cut edges where they show least. One manufacturer's instructions suggest turning cut edges up above eye level and down below it, and coating them with mortar. Corner pieces go at corners where the product line offers them. Those small choices make a repair harder to spot from the yard and the street.
Why chimney stone wears faster than wall stone
A chimney stands above the roof and meets weather on every face. Stone and joints there work harder than the same stone on a sheltered wall lower down the house.
None of that reflects a fault in how your house was built, because it is simply where a chimney sits. It explains why the chimney may need attention before other stonework does. It also explains why its top and its flashing matter so much to any stone repair, because they decide how much water reaches the stone in the first place.
A look from the attic side
On a stone-clad framed chase, the attic can show whether water is getting behind the stone. Stained framing or damp sheathing next to the chase is a clear signal that the drainage behind the stone has failed. Dry framing is useful news as well, because it narrows the search.
Where the attic is safely accessible, we ask to look, without disturbing insulation near the chimney pipe. What we find there helps decide where to lift stones, if we need to lift any at all, and keeps the exploratory work to the smallest useful area.
Stone repair scope for homes in Sunrise
- Resetting stones in a full mortar bed
- Joint profile and color matched to existing
- Weep screed cleared or reset at the base
- Clearance kept between stone and roofing
Answers on repointing chimney stone
Should I pull out a loose stone before it falls?
Please do not. Stones are heavier than they look and can bring others with them. Keep everyone away from the ground beneath it, let us know which face it is on, and we will look at it early in the visit.
Do you cover open areas if the work takes more than a day?
Yes. Before we leave each day, any area where stones are off is sheltered from rain, and removed stones are stored safely until they go back. Loose debris goes with us rather than staying on the roof.
Can stone joints be repointed without removing stones?
Often, yes. Worn mortar is raked out to sound material, and the joints are refilled and tooled. Stones come off only when they are loose or when something behind them needs attention.
More Ways to Care for Your Fireplace
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo