Chimney and fireplace repair and service for Sunrise, FL homes
A family-owned local team for chimneys and fireplaces in Sunrise, with a free inspection before any price is set.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney and Fireplace Services in Sunrise
- Chimney Sweep and Chimney Cleaning in SunriseArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Chimney Cap Installation and Replacement in SunriseProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Chimney Flashing Repair in SunriseRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney Leak Repair in SunriseFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Chimney Crown Repair in SunriseRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Chimney Masonry Repair in SunriseRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Chimney Liner Installation and Relining in SunrisePlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Chimney Waterproofing in SunriseTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Chimney Rebuild in SunriseRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney Chase Cover Replacement in SunriseReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Gas Fireplace Repair and Service in SunriseGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Gas Fireplace Installation in SunriseCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Chimney Tuckpointing in SunriseRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Spalling Brick Repair and Chimney Brick Replacement in SunriseReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Stone Chimney Repair in SunriseRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Flue Repair in SunriseAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Smoke Chamber Repair in SunriseRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Top-Sealing Damper Installation in SunriseFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney Animal Removal in SunriseAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Hurricane and Storm Damage Chimney Repair in SunriseAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Firebox Repair in SunriseRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Fireplace Hearth Repair in SunriseRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Damper Repair and Replacement in SunriseRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Prefab and Zero-Clearance Fireplace Repair in SunriseIdentify and repair manufactured fireplace components using the appropriate model information.
- Fireplace Restoration in SunriseCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Wood-Burning Fireplace Insert Installation in SunriseFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Gas Fireplace Venting in SunriseAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Ventless Gas Fireplace Service in SunriseService the identified vent-free appliance without bypassing its required safety components.
We are a family-owned company that works on factory-built chimneys as readily as brick ones, and we serve both kinds of home in Sunrise. A framed chase is the boxed structure that hides a metal chimney pipe. The metal cover on top of it, called the chase cover, keeps rain out of the whole frame.
When that cover fails, water can reach the framing and the fireplace below. Tell us if you see rust streaks down the siding or stucco of the chase. Water stains on the ceiling near the fireplace and rust on the firebox walls are worth mentioning too. If you know when the cover was last replaced, share that as well.
Those clues often trace back to the top. A cover that has sagged into a dish will hold water instead of shedding it, and a seam that has opened lets that water in. A replacement cover is measured to the chase rather than taken off a shelf. A well-made one has cross-breaks or a pitch to move water off.
It has a drip edge that throws water clear of the siding and a collar that seals around the chimney pipe. The Florida Building Code treats the factory-built chimney pipe, its cap and its termination as parts of a listed system. They are installed according to the maker's instructions, so we match the listed cap and collar to the new cover.
It starts with a free inspection, then a written estimate that is free and priced upfront. Book the cover, or any other item on the estimate, within 72 hours of that visit's inspection and 10% off applies. If the chimney is open overnight, we cover it before we leave. Old metal is hauled away, and you get a written record of the work with our workmanship warranty.
Arranging Chimney Service in Sunrise
Where should we start with a fireplace that came with the house?
Start with a free inspection before anyone lights it. Share whatever the sellers left, such as a manual or an invoice, and tell us how you hope to use the fireplace. We identify the system, check the accessible parts and explain what it needs, if anything.
Should I stop using the fireplace until the inspection?
If you have seen smoke in the room, water in the firebox, fallen masonry or a damaged chimney top, leave it unused until it has been looked at. If nothing seems wrong, tell us how it has been behaving, and we advise you when you book.
When does the 72-hour window for the discount begin?
The clock starts once your own free inspection is complete. You then have 72 hours to approve work, and a sweep, a repair or an installation approved in that time comes with a 10% discount. The window belongs to you alone, so another customer's booking does not shorten it.
Chimney Service for Your Sunrise Home
- Sunrise is in Broward County.
Sources: Verified geographic sources
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo