Chimney parging and stucco repairs in Edgewood
The water source is found first, so the new stucco is not left to fail below an open leak.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When chimney stucco in Edgewood needs attention
- A bulge or swelling in the plaster
- Paint peeling on one chimney face
- Stucco pulling away at a corner
- Stains in the attic near the chimney
Jump to
Chimney stucco work explained step by step
Cement plaster over the chimney body
Stucco on a chimney is a cement plaster made from sand and a cementitious binder. It goes on wet and hardens into a skin over the structure beneath. That skin sheds rain and gives the chimney its finish, but it does not hold the chimney up.
Because the skin and the structure are separate layers, we assess them separately. A crack can sit in the plaster alone, or it can follow a problem underneath. The free inspection is where we sort out which one you have, before any repair is priced.
What an elastomeric finish can and cannot do
Elastomeric finishes are thick, flexible coatings that can bridge fine cracks. They are one of the finishes used on stucco chimneys, and they can make a surface look uniform again. The choice between a breathable finish and an elastomeric one is made for your chimney, not by habit.
An elastomeric coat does not repair loose plaster, failed lath or a leak at the top. Because it forms a film, it can also slow drying if water gets behind it. We use one only where the stucco is sound, the water source has been dealt with and the product's data supports it.
Climbing plants and shrubs on chimney stucco
Plants that climb or rub against stucco hold moisture on the surface and can work into cracks. The National Park Service notes that unattended plant growth gradually enlarges cracks in stucco.
Keep vines off the chimney and trim shrubs back from its base where you can. If growth has already rooted into a crack, removing it may open the crack further, and we include that area in the repair. We can explain what to trim before the visit and what to leave for us.
When a chimney needs a full restucco
Patching has limits. Much of the stucco may have lost its bond, or earlier incompatible repairs may have compromised the surface. Then a full removal and new application can make more sense than a string of patches.
The International Masonry Institute notes that when damage is past the point of repair, removal and reinstallation of a new system may be required. We tell you when we think a chimney has reached that point and show you why. A full restucco is priced as its own option beside the patch approach.
Line by line on a stucco repair estimate
- Roof junction where stucco meets flashing
- Adhesion check on the existing coating
- Debris cleaned up and hauled away
- Hose water test when the job needs it
Chimney stucco questions we hear in Edgewood
Will the repaired stucco match the rest of the chimney?
Texture can usually be matched closely. Color is harder on unpainted stucco, because the old surface has weathered. We explain the likely result before you approve, and we can make small samples so you can judge the match yourself.
Should I pressure wash the chimney before you come?
Please do not. High pressure can drive water into cracks and loosen weak plaster, which makes the inspection harder to read. Leave the surface as it is, and we will look at it in its current condition.
When is a hose water test part of a stucco job?
No. We run a hose water test only when the job calls for it, usually when the entry point is still unclear after the inspection. We explain why it would help before doing it.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo