Chimney parging and stucco repairs in Glenvar Heights
The water source is found first, so the new stucco is not left to fail below an open leak.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues hidden in a cracked stucco finish
- A bulge or swelling in the plaster
- White powder on the stucco surface
- Crumbling stucco close to the ground
- A vertical crack where chimney meets wall
Jump to
Chimney stucco, one layer at a time
Leaving metal lath off sound masonry
Adding metal lath is not automatically an improvement. Preservation guidance advises against inserting metal lath when stucco is applied over masonry in sound condition. Fastening it damages the masonry, and any water that reaches it can start rust.
Where the stucco sits on sound block or brick, we prepare the masonry surface so the new coats bond to it directly. Lath is kept for framed chases and for the few masonry cases where the base cannot take a direct bond. We explain the choice for your chimney before the work starts.
Trial samples before matching a stucco finish
Matching old stucco usually takes trial and error. Guidance on repairing old stucco recommends preparing test samples and setting them beside the existing stucco to compare color, texture and composition once they dry.
For a visible chimney face, we can make small samples of the finish before the real repair. You see them dry against the old surface and choose the closest. For a painted chimney this step matters less, because the final paint decides the look. We tell you which case applies.
Looking at the chimney from inside the attic
Where the chimney passes through an accessible attic, the view from inside can be revealing. Stains on the framing, damp sheathing or daylight at the chimney edge all point toward how water is moving.
If you know how to reach the attic, tell us before the visit and clear a path to the hatch. We look only where it is safe to walk and stand. What we see there is noted with the exterior findings, and it can change where we look first outside.
Checking stucco accessories more often near the shore
Near the coast, the metal edges of a stucco chimney tend to show wear before the plaster does. Rust marks along a corner or at the base can be the first sign that a bead or screed is failing.
In that exposure, it makes sense to have those edges looked at on a shorter cycle than inland. On such a visit our team checks the corners, the bottom screed and any trim where stucco meets metal. Catching a corroding bead early keeps the repair to a corner rather than a whole face.
Line by line on a stucco repair estimate
- Sealant at stucco transitions
- Full-face refinish priced as an option
- Exploratory opening with your approval
- Written record of the stucco work
Chimney stucco questions we hear in Glenvar Heights
Is chimney parging the same thing as stucco?
On the outside of a chimney they are closely related, and people use the words loosely. Both are cement coatings over masonry, and we repair them the same way. Parging inside a smoke chamber is a separate job with different materials.
Can you restucco a chimney that has many layers of paint?
Yes, but the paint layers matter. Loose paint has to come off, and a heavily painted surface may need a bonding agent or full removal before new stucco can grip. We test the surface and explain the approach in the estimate.
Can you repair the stucco if the chimney top also leaks?
We can, but the top should be dealt with first or at the same time. A patch below a leaking top tends to fail early. The top repair is listed separately, and we explain the order before you approve anything.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo