Fixing chimney stucco and its water source in Golden Heights
The free inspection covers every accessible face, the top, the roof junction and the base.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs chimney stucco is starting to fail
- Pieces of stucco found near the base
- Rust spots lined up in rows
- Old patches cracking at their edges
- Cracks that return after painting
Jump to
Stucco repair details that decide the result
Soft framing found behind chimney stucco
Stucco over a framed chase can crack because the wood behind it has softened. Patching the plaster in that case covers the symptom and leaves the cause in place. The new patch tends to crack again along the same line.
When we find soft sheathing or framing, the wood repair is written up as chimney chase repair, a separate item with its own scope. The stucco work follows once the support is sound. You approve each part on its own, so you can see what the plaster work covers and what it leaves out.
Reproducing the texture on a stucco chimney
Stucco textures range from smooth to heavily worked finishes. A textured surface can hide a well-made patch. On textured stucco, it is not usually necessary to replace a whole wall section for a repair to blend in.
Smooth stucco is less forgiving, because every change in plane or texture shows in low sunlight. We look at the existing finish closely and describe how we would reproduce it. If you have leftover finish material or a record of the original texture, share it with us.
Checking the old coating before adding a new one
A new coating has to bond to what is already on the wall. The International Masonry Institute recommends knowing the type of existing coating and testing how well it adheres before any recoating project.
For a chimney, that can mean a small test area and a check of whether the old coating lifts. If it does, it needs removing where it has failed. We tell you what the test shows and how it affects the scope, rather than coating over a surface that is already letting go.
Gutters and downspouts aimed at the stucco
A leaking gutter or a downspout that discharges against the chimney can soak one part of the stucco again and again. Leaking gutters and downspouts are among the common causes of stucco decay.
Tell us where the downspouts near the chimney discharge and whether any gutter overflows onto it in heavy rain. Redirecting that water is often simple, and it protects the repair. Gutter work is not part of our stucco scope, but we point out what we see and why it matters.
Stucco work we separate on the estimate
- Removal of failed stucco and old patches
- Lath and fasteners in the repair area
- Moist curing between coats
- Exploratory opening with your approval
What people ask about chimney stucco
How do you tell stucco over block from stucco over framing?
We look at the top first, because a metal cover usually means a framed chase and a concrete crown usually means masonry. Tapping, the bottom edge and the attic view add more. Where the clues disagree, we suggest a small opening you approve.
Why does the stucco near the ground keep breaking down?
The lowest part of the wall often stays wet from splashing rain, irrigation, soil piled against it or a buried weep screed. We check the base conditions and suggest changes you can make, alongside any repair we price.
Does rain affect when new stucco can be applied?
Yes. Heavy rain can damage fresh stucco, so we cover the work or move a coat to another day when rain threatens. Strong heat matters too. We tell you in advance if the forecast changes the schedule.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo