Chimney parging and stucco repairs in Medley
The water source is found first, so the new stucco is not left to fail below an open leak.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs chimney stucco is starting to fail
- Old patches cracking at their edges
- Stucco pulling away at a corner
- Vines rooted into chimney cracks
- Gaps where stucco meets the roof
Jump to
Stucco repair from base coat to finish
Filling a stable stucco crack with repair mortar
A crack that has stopped moving and is wide enough to take water is usually opened slightly and filled, rather than bridged with a coating. Opening it gives the repair mortar a clean, sound edge to bond to.
The mortar is chosen to behave like the surrounding stucco and is finished to match its surface. We keep the repair within the crack line and its immediate edges. Where the crack runs into loose plaster, the repair becomes a patch instead, and we explain that change before making it.
A crown that throws rain clear of the stucco
The Brick Industry Association's guidance on residential chimneys shows a crown that overhangs the face of the chimney. Where it does not overhang, a drip is formed below it instead. Either detail reduces the water running down the face.
If the crown on your chimney is flush with the wall, rain can sheet straight down the plaster. That alone does not mean a new crown is needed, but it helps explain a pattern of damage. We note the crown detail during the inspection and tell you whether chimney crown repair belongs in the plan.
Renewing sealant at the edges of the stucco
Where stucco meets metal, trim or a different wall material, the joint is often closed with a flexible sealant. Those joints age faster than the plaster and eventually crack or pull away. Sun and movement wear them out first.
The International Masonry Institute lists replacing sealant joints at appropriate intervals as part of stucco maintenance. We check the sealant at the chimney's transitions and replace failed joints as a listed item. It is small work, but an open joint can admit a steady amount of water.
Blending a patch into an aged stucco surface
New stucco looks fresher than a surface that has weathered in sun and rain. Even with the right mix and texture, a patch can look lighter or cleaner for a while.
We explain before the work how the patch may look at first and how it is likely to change as it weathers. On a painted chimney, the paint resolves most of this. On an unpainted face, you can choose between waiting for the patch to tone down and refinishing the face for an even look.
Stucco repair scope for homes in Medley
- Weep screed at the base checked
- Color sample for exposed faces
- Adhesion check on the existing coating
- Access by ladder, roof or scaffold
What people ask about chimney stucco
Does rain affect when new stucco can be applied?
Yes. Heavy rain can damage fresh stucco, so we cover the work or move a coat to another day when rain threatens. Strong heat matters too. We tell you in advance if the forecast changes the schedule.
Can you restucco a chimney that has many layers of paint?
Yes, but the paint layers matter. Loose paint has to come off, and a heavily painted surface may need a bonding agent or full removal before new stucco can grip. We test the surface and explain the approach in the estimate.
Are hairline cracks in the finish worth repairing?
Many are surface matters that a thin slurry or paint can close. We still tap around them and check whether they line up with anything behind the plaster. If both checks are clean, the repair can stay small.
More Ways to Care for Your Fireplace
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo