Loose stucco on a chimney in North Bay Village, fixed properly
If the repair area grows once the wall is open, you approve the change before we continue.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco cracks and bulges worth mentioning
- White powder on the stucco surface
- A long crack near the roof line
- Stucco pulling away at a corner
- Vines rooted into chimney cracks
Jump to
Stucco chimney repair work in North Bay Village
Keep a new patch flush with the old plaster
A new patch should meet the old stucco at a clean edge, not spread over it. A thin feathered layer on top of sound stucco has little to grip and tends to flake at the rim. It also leaves a visible halo around the repair.
We cut the edge of the repair area back to sound material and finish the new work flush with it. If the whole face needs a new finish for color, that is a separate decision, and we price it as its own item. You choose whether the patch alone is enough.
Trial samples before matching a stucco finish
Matching old stucco usually takes trial and error. Guidance on repairing old stucco recommends preparing test samples and setting them beside the existing stucco to compare color, texture and composition once they dry.
For a visible chimney face, we can make small samples of the finish before the real repair. You see them dry against the old surface and choose the closest. For a painted chimney this step matters less, because the final paint decides the look. We tell you which case applies.
Stucco layers separating from the base
Delamination is when stucco loses its bond to the base, or when one coat separates from the coat beneath. The International Masonry Institute lists it with cracking and spalling as common forms of stucco damage.
A delaminated area can look almost normal until it is tapped or until a piece falls. Because it can spread from a small start, we map its full extent before quoting. The repair removes the separated layers back to a sound bond, and the estimate states the area involved.
Comparing stucco repair quotes side by side
Two stucco quotes can describe very different jobs under the same heading. One may cover a surface coat only, while another includes cutting back to sound material, new lath and a matched finish. The headings match, but the work does not.
When you compare, look at the repair area, the base work, the coats rebuilt, the finish and what happens if more damage appears. Ask each contractor how the water source will be handled. We are glad to walk you through our estimate line by line.
What the stucco inspection covers in North Bay Village
- Color sample for exposed faces
- Exploratory opening with your approval
- Hose water test when the job needs it
- Access by ladder, roof or scaffold
Asked about stucco patches and finishes
Can one damaged area be repaired without redoing the whole face?
Often, yes. A defined patch works well where the base is sound and the loose area is limited. We map the hollow zone first. If the color match on a prominent face worries you, refinishing the face is offered as a separate option.
Will the repaired stucco match the rest of the chimney?
Texture can usually be matched closely. Color is harder on unpainted stucco, because the old surface has weathered. We explain the likely result before you approve, and we can make small samples so you can judge the match yourself.
How many visits does a stucco repair usually take?
Usually more than one, because each coat needs to cure before the next goes on. The exact plan depends on the size of the repair and the weather. We set out the likely sequence in the estimate, and the curing gaps do not change the agreed price.
More Ways to Care for Your Fireplace
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo