Loose stucco on a chimney in Palm Springs North, fixed properly
A locally owned team repairs chimney stucco in Palm Springs North with care for the finish you see.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco damage worth a closer look in Palm Springs North
- Pieces of stucco found near the base
- Paint peeling on one chimney face
- Cracks that return after painting
- A vertical crack where chimney meets wall
Jump to
Stucco repair choices for Palm Springs North chimneys
Clues to what sits behind the stucco
Several clues help identify the base without opening the wall. A metal cover on top usually points to a framed chase around a factory-built chimney. A poured crown with clay flue tiles usually points to masonry. A metal strip along the bottom edge of the plaster suggests lath on framing.
Tapping the surface adds more information, and so can a look from the attic where it is accessible. None of these clues is proof on its own. If they disagree, we say so and explain what a small, approved opening would settle.
Deciding whether a stucco crack still moves
Some cracks open and close as the structure moves. Others formed once and have stayed put. Knowing which kind you have comes before choosing what goes into the crack.
For a crack that still moves, the International Masonry Institute suggests a flexible material. One option is a sealant with fine sand broadcast into it so it blends with the wall. A crack that has stopped moving can take a rigid repair mortar matched to the surface. Choosing the wrong one tends to show up as the crack reopening.
Corroded corner bead and casing bead
Metal beads form the corners and edges of many stucco chimneys. When they corrode, the stucco along the corner can crack in a straight line, bulge or lose its edge entirely. Corners take knocks as well as weather.
A corner repair usually means cutting back the plaster on both faces, replacing the corroded bead with a corrosion-resistant one and rebuilding the coats. The corner is a visible line, so we take care over its straightness and texture. The estimate shows how far onto each face the corner repair reaches.
Foam-backed finishes that only look like stucco
Some chimneys are clad in a foam-backed finish system that looks like stucco from the ground. It is a different assembly, with foam board, a reinforced base coat and a thin finish layer. Tapping it sounds and feels different from cement plaster.
Those systems have their own repair methods set by their makers, and a cement stucco patch is not the right fix. We identify which material you have during the inspection. If it is a foam-backed system, we tell you plainly and explain what that means for the repair.
What we check before pricing stucco work
- Water barrier where framing is exposed
- Workmanship warranty on the repair
- Hose water test when the job needs it
- Water source listed as its own item
Stucco repair answers for homes in Palm Springs North
Can new stucco go straight over the old surface?
Only where the old stucco is sound, clean and firmly attached, and even then a new finish is a surface treatment. Loose or hollow areas have to come off first. Spreading new plaster over failing stucco usually fails with it.
Can you restucco a chimney that has many layers of paint?
Yes, but the paint layers matter. Loose paint has to come off, and a heavily painted surface may need a bonding agent or full removal before new stucco can grip. We test the surface and explain the approach in the estimate.
When is a hose water test part of a stucco job?
No. We run a hose water test only when the job calls for it, usually when the entry point is still unclear after the inspection. We explain why it would help before doing it.
More Ways to Care for Your Fireplace
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo