Hollow or bulging chimney stucco repaired in Riverland
Framing damage behind the stucco is shown to you and priced as its own separate item.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco cracks and bulges worth mentioning
- Pieces of stucco found near the base
- Old patches cracking at their edges
- Stains in the attic near the chimney
- Weep screed buried under soil or paving
Jump to
Stucco repair choices for Riverland chimneys
Coatings that can hold water inside stucco
Some coatings form a film over the stucco. The International Masonry Institute cautions that film-forming coatings and water repellents can reduce water absorption. They can also stop the stucco from drying when water does get in.
On a chimney, water can enter at the top or at a crack and then sit behind the film. We read the coating's data before recommending it and look at how the chimney can dry. If a breathable finish fits your situation better, we say so and explain the trade-off.
Loose stucco above a path or entry
Pieces of stucco that fall from a chimney can land on a walkway, a patio or a car. If you find fragments near the base, treat the area below as a place to keep clear.
Rope off or avoid the space under the loose section until it is assessed. Mention the location when you call, so we can look at it early in the visit. Where a quick temporary measure makes the area safer, we explain it and list it separately from the permanent repair.
Reading the lines of a stucco estimate
A clear stucco estimate separates the work into parts you can judge on their own. The repair area, the base repair beneath it, the coats, the finish and any painting each appear as their own lines.
Work on another component, such as the chimney top or the roof flashing, is listed separately with its own price. So is any exploratory opening. You can approve the whole scope or only part of it. Nothing is added without a conversation first, and our pricing is set out upfront.
Why stucco is not cleaned with high pressure
High-pressure washing can drive water into cracks, erode the finish and loosen weak plaster. On a chimney, it can also push water past the top or the flashing and into the house.
The National Park Service suggests low-pressure washing and soft brushes for stucco, and warns that textured surfaces are hard to clean without removing some of the texture. If the chimney has been pressure washed recently, tell us, because that can explain fresh cracks or damp areas we find during the visit.
What the stucco inspection covers in Riverland
- Repair boundary cut to sound edges
- Base condition behind the repair area
- Water barrier where framing is exposed
- Moist curing between coats
Stucco repair answers for homes in Riverland
Will the repaired stucco match the rest of the chimney?
Texture can usually be matched closely. Color is harder on unpainted stucco, because the old surface has weathered. We explain the likely result before you approve, and we can make small samples so you can judge the match yourself.
What if the old stucco is soft and crumbly?
Soft, sandy stucco may be rich in lime, and a hard cement patch would not suit it. We assess its character first. The repair material is then chosen to be compatible, and we explain the choice before you approve.
Do you replace the metal lath or reuse it?
Sound lath that has only pulled away can often be refastened. Corroded or torn lath in the repair area is cut out and replaced with corrosion-resistant lath lapped into what remains. The estimate says which we expect to do.
More Ways to Care for Your Fireplace
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo