Vent-free gas fireplace service for Bay Point homes
Vent-free service that respects the safety pilot, the room size rules and the listing of the host fireplace.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that the ODS pilot or burner needs attention
- Pilot lights but burner will not
- Igniter clicks with no flame
- Dark marks on the wall above
- Pilot hard to light after gas work
Jump to
Keeping a vent-free fireplace within its listing
Vent-free units in spaces off a bedroom
The fuel gas code also restricts gas appliances in a space that opens only into a sleeping room or a bathroom. A vent-free unit placed there falls under the same rules as one in the bedroom itself. The layout matters as much as the name of the room.
Describe where the unit sits and which rooms open from that space. We check the layout against the code's wording and the model's manual. If the location is not allowed, we say so before any service begins in Bay Point.
The damper above a vent-free log set
In a wood fireplace fitted with vent-free logs, the damper is not something to seal shut or forget. Log set manuals say how it should be set for that model. Some tie an open damper to clearance or air rules, and at least one says the damper must not be sealed.
We check that the damper is set as the manual requires and that it moves as it should. If the damper is damaged, its repair is a separate item, and we name it on the estimate. Damper repair is quoted on its own.
The screen in front of a vent-free fire
Vent-free manuals expect a screen in place while the unit burns. The screen keeps hands and objects away from the flame, and it has openings that let combustion air reach the burner. A solid panel in its place changes the air the flame gets.
We check that the screen fits, is not damaged and does not block air. If it was removed during cleaning or a renovation, we put it back. Where a replacement is needed, it comes from the maker or matches what the manual describes.
Inlet and manifold pressure on vent-free units
Many vent-free gas controls carry two small test ports. One shows the supply pressure arriving at the valve, and the other shows what the valve sends on to the burner. The rating plate gives the range each should fall in, and readings outside it explain a good share of pilot and flame faults.
We take both readings with the unit running where the model allows. You get the result in plain words, not just a figure. If the incoming pressure is the problem, the work sits with your gas utility or a gas contractor, and the written record shows what we measured.
Line items for vent-free fireplace service
- Pilot air intake openings cleaned
- Thermocouple or thermopile output check
- Inlet and manifold pressure readings
- Ember layer thinned or renewed
Ventless unit questions we hear often
What should I do if I smell gas near the unit?
Leave the house with everyone inside, without lighting anything or touching switches. Once you are outdoors, call your gas utility or 911 and follow their instructions. Stay out until they clear the house, and keep the fireplace off afterward.
Should a working vent-free fireplace still get routine cleaning?
Yes. The manuals call for routine cleaning and inspection by a service person, including the burner ports, the air opening and the ODS pilot. Rooms with pets, carpet or heavy use may need it more often, and we suggest a pattern for yours.
Why is there moisture on the windows when it runs?
Burning gas produces water vapor, and a vent-free unit releases it into the room. More condensation than usual can suggest the unit is large for the space or short of fresh air. We check both against the manual.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo