Ventless fireplace repair, matched to the manual, in Olympia Heights
A free inspection in Olympia Heights covers the appliance and the room it heats, with separate items for each.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a ventless gas fireplace needs service
- Odor that lasts past break-in
- Logs cracked, moved or missing
- New finishes built close to it
- Pilot hard to light after gas work
Jump to
Servicing the ODS pilot, burner and logs
Why the ODS pilot keeps its factory setting
The manuals leave no room here. No adjustment is to be made to the oxygen depletion sensor pilot, and tampering with it is forbidden. The pilot's setting is part of what the listing tested, so changing it removes the protection the room relies on.
If a pilot misbehaves, it is cleaned as the maker describes or replaced with the model the maker names. Please do not bend, open or block any part of it yourself. A unit that trips repeatedly should stay off until we have found the reason.
Pilot that dies when the gas knob is released
On a millivolt control, the pilot is held in by hand until the sensing tip warms. If the pilot dies the moment the knob is released, the thermocouple is not holding the valve open. The cause can be a dirty pilot, a weak flame, a loose connection at the valve or a worn part.
We check them in that order, because the simpler causes come first. Please do not hold the knob in longer than the manual says, or relight again and again. Leave the unit off and describe what happened when you phone us.
A masonry host for vent-free logs
Log set manuals allow vent-free sets in a solid fuel masonry fireplace that is in sound working order. Cracks, loose parts or gaps in the firebox and hearth change where heat and air go. The burner's listing assumes a sound host.
We look at the firebox and hearth while we service the logs. If the masonry needs work, we name it as a separate item and explain why it matters to the burner. Firebox and hearth repair are their own services, priced on their own.
First use of a ventless unit after idle months
Months of disuse let dust, lint and insects collect in a vent-free pilot and its ports. Spider webs appear in the manuals as a cause of pilot trouble. Air may also sit in the gas line.
Before you use it again, a maintenance visit clears those paths and confirms the pilot. If you prefer to light it yourself, follow the manual's lighting steps exactly and stop if anything seems wrong. We are glad to walk through the steps with you on a visit.
What we price separately on a ventless unit
- Pilot supply line cleared where specified
- Control compartment cleaned
- Bedroom or bathroom location review
- Lighting sequence shown to you
Ventless gas fireplace questions from Olympia Heights
Can a vent-free fireplace be used after it was under water?
Not until it has been inspected. The manuals say to replace any part of the control system and any gas control that has been under water. We identify those parts from the maker's list and price them before any work.
Is a vent-free unit meant to heat the whole house?
No. The Florida fuel gas code says unvented room heaters may not be the sole source of comfort heating in a home, and the manuals call them supplemental. They warm a room, with that room's air and volume in mind.
What should happen if a carbon monoxide alarm sounds?
Get everyone out into fresh air right away and call 911 from outside. Do not go back in until responders say it is safe. Keep the vent-free unit out of use until someone has looked at it and the reason for the alarm is known.
More Ways to Care for Your Fireplace
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo