Skip to content
(645) 465-4171

Chimney bricks replaced and matched in Lighthouse Point

Broken brick and dust are cleaned up and hauled away, and debris is kept out of the flue.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run

Clues that point to spalled brick

  • Brick fragments on the roof or ground
  • Spalled brick just above the roofline
  • Stains inside beside the chimney
  • A clear sealer flaking off the brick
Jump to

Replacing chimney bricks the careful way

Soluble salts that push brick faces off

Water moving through masonry carries dissolved salts. Federal preservation guidance explains that when that water dries out below the surface, the salts crystallize inside the brick. The pressure can push the outer face off in flakes or sheets.

The white deposits sometimes seen on brick come from the same process, only at the surface. When crystals form inside instead, the face gives way. We look at where the damage sits and how the wall dries, because the replacement brick will face the same process unless the water is reduced.

A clear sealer applied before the spalling

Sometimes a chimney was sealed to stop a leak, and the faces began to flake afterwards. Brick industry guidance explains that some coatings slow drying through the brick face, and water held inside can push the surface off.

Tell us if you know a sealer was applied and roughly when. We check how it is behaving on the remaining brick. The damaged units are replaced, and we explain whether the sealer is still a risk to the bricks around them.

When to think about a water repellent again

Once damaged bricks are replaced and the water source is fixed, it is tempting to seal the chimney straight away. Brick industry guidance suggests waiting several months after repairs, because the repairs themselves often solve the water problem.

If water still gets in after that time, a repellent that lets the masonry breathe can be considered. We discuss it then as a separate item. Waiting also lets the new mortar cure fully before anything is applied over it. Any product chosen then should let the brick release water vapor.

Using the fireplace during brick work

Brick replacement is outside work, but the mortar around new units is still curing for a while. Heat from a fire warms the masonry and can dry fresh joints faster than they should.

Before the work starts, we say whether to pause fires and when normal use can return. It depends on where the new units are and how close they sit to the flue. If an appliance vents into the chimney, tell us beforehand so its flue stays clear.

What the free brick inspection covers

  • Break-out of each damaged unit
  • Opening cleaned of dust and fragments
  • Protection for roof, windows and plantings
  • Upfront price for each replacement area

Questions to ask before replacing bricks

Does the workmanship warranty cover replaced bricks in Lighthouse Point?

Yes, the agreed brick replacement carries our workmanship warranty. The written record lists which units were replaced and where, so any question later can be checked against the work that was done.

Why does the mortar around new bricks need curing care?

Mortar that dries too fast bonds poorly. We keep the new joints damp and out of strong sun as needed and tell you what to avoid, such as washing or cleaning chemicals, while they harden.

How long does a chimney brick replacement job take?

It depends on how many units are involved, how easy the chimney is to reach and how long a matching brick takes to find. We give you a realistic schedule with the estimate and tell you if anything changes it.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With