Skip to content
(645) 465-4171

Brick fireplace restoration, planned as one job, in Lighthouse Point

Our family team restores neglected fireplaces with upfront pricing and a written record of the work.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run

Signs a fireplace needs restoring

  • Firebox floor worn or broken
  • Several small faults at once
  • Earlier repairs that keep failing
  • Water marks inside the firebox
Jump to

Restoration work inside and around the firebox

Bringing the damper back into use

A neglected fireplace usually has a neglected damper. The plate may be seized, rusted through or missing, and the control may no longer reach it.

Damper work is part of the restoration scope. We free and clean a sound damper, re-hang a dropped plate, or replace parts that have failed. The finished damper should open all the way, shut evenly and answer to its control from the room. The damper is listed as its own item, so you can see its share of the work.

The screen in front of the fire

A fireplace screen keeps sparks and rolling embers inside the firebox. On a neglected fireplace the mesh may be torn, the frame bent or the screen missing altogether.

For a factory-built unit, the screen is a listed part and must come from the manufacturer's parts list. For a masonry fireplace, a screen that fits the opening and stands firmly is what matters. We check the screen as part of the restoration and note any replacement. It is a small item that protects everything else.

The whole-fireplace look at the free inspection

The free inspection for a restoration covers the whole fireplace. We look at the firebox, the firebrick and joints, the damper, the smoke shelf and chamber, the hearth, the face and the clearance to nearby trim.

We also look up the flue as far as we can see from the fireplace. You hear what we found and what it means for use. The findings become a free written estimate that separates essential repairs from finish work, with each item priced.

A cast iron fireback

Some fireplaces have a cast iron plate against the back wall of the firebox. It reflects heat into the room and protects the masonry behind it.

A fireback can crack, rust or come loose over time. We check its condition and how it is held in place. A sound fireback is cleaned and reset. A cracked one may still be usable if it stays firmly in place, and we explain the options. The fireback is noted separately from the firebrick behind it.

How a restoration estimate is laid out

  • Listed parts for factory-built units
  • Retained features listed on the estimate
  • Separate notes on chimney-side findings
  • Grate size and position checked

Restoring an old fireplace, questions answered

Will the new mortar match the old joints on the face?

We aim to match color, texture and joint shape. Face joints are repointed with a mortar no harder than the brick, following preservation guidance. The match is checked on a small area before the whole face is done.

Will you keep the original look of my fireplace?

That is the aim. We keep sound features, match replacement brick, tile and mortar as closely as available materials allow, and tell you where an exact match is not possible before the work starts.

Can you tell whether my fireplace is masonry or factory-built?

Yes, during the free inspection. The difference matters, because a masonry fireplace is repaired with masonry methods while a factory-built unit must stay within its listing and use the manufacturer's parts.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With