Spalled brick replacement on chimneys in Sunrise
Crown, flashing and joint repairs stay separate items, each with its own reason.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When chimney brick faces start to break
- Brick fragments on the roof or ground
- Brick cores showing where faces fell
- White deposits around damaged bricks
- Spalled brick just above the roofline
Jump to
What careful brick replacement involves
Rain and fresh mortar around new bricks
Fresh mortar around a new brick is soft at the surface. Heavy rain can wash fine material out of the joints and streak the brick below. New units are protected when rain is likely.
If rain threatens during the work, we cover the day's repairs before leaving and may move the schedule. A short delay is better than redoing the joints. Tell us if you see covers moved by wind so we can reset them. We also check the covered work before starting again the next day.
Maintenance visits and the brick faces
Brick industry maintenance guidance calls for regular inspection of masonry, noting that chimneys face harsher exposure than walls. Catching a spalled unit early can mean replacing one brick rather than several.
During maintenance visits we look at each face for new flaking, cracked units and loose brick, along with the crown, joints and flashing. We tell you what has changed since the last visit. Ask about maintenance visits when you book your inspection. Small problems caught on a visit are easier to keep small.
Checking brick faces from the ground
You do not need to climb to spot damaged brick. Binoculars are the tool brick industry maintenance guidance suggests for surveying upper masonry. From the yard, look for pale patches where faces have fallen, broken corners and fragments on the roof.
Note which face shows the damage and roughly where. Tell us when you call. Stay off the roof and away from ladders. A closer look is part of the free inspection, and your notes help us plan where to start.
Fragments on the roof or on the ground
Flakes of brick collecting in a gutter, on the roof or at the foot of the chimney suggest the damage is still active. Thin flakes usually come from the surface of a unit. Chunks with square edges may be corners or whole faces.
Keep a few if you find them and tell us where they landed. They help us judge the kind of damage before we reach the roof. Keep people away from the area below while pieces are still falling.
What the free brick inspection covers
- New brick buttered and set in place
- Separate lines for crown or flashing work
- Curing care for the new joints
- Overnight cover for an open chimney top
What people ask about replacing bricks
What happens to the mortar around a replaced brick?
The joints around each new unit are filled completely and tooled to match the existing profile. The mortar is chosen to behave like the existing mortar, because a mix that is too hard can damage the bricks next to it.
How many bricks can be replaced before a bigger repair is needed?
There is no fixed count. It depends on how the damage is spread and whether the masonry around it is sound and not moving. When damaged units cluster in large areas or courses are loose, we explain a partial rebuild instead.
What if my chimney brick has been painted?
New brick can go into a painted chimney, but paint peeling away with the brick face may be trapping moisture. We explain whether the paint is part of the problem. Any refinishing decision is yours and is not part of brick replacement.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo