Worn chimney cap replacement in Lauderdale Harbours
Cap work you sign off on inside 72 hours of the free inspection carries a 10% discount.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney cap trouble you can spot in Lauderdale Harbours
- Leaves or twigs landing in the firebox
- Smoke spilling into the room after cap work
- One flue capped and another left open
- Nesting material showing at the top
Jump to
Small details that decide a chimney cap fit
The flue under the cap decides the method
Before any cap is chosen, we identify what it has to fit. A masonry chimney may end in a clay flue tile, a stainless liner with its own top plate, or a combination on a chimney with several flues. A framed chimney usually ends in listed factory-built pipe.
Each of those endings takes a different kind of cap and a different way of fastening it. A clamp that grips clay tile is wrong for a listed metal pipe, and a pipe cap will not suit a masonry flue. Tell us what you know about the chimney. We confirm the rest on the roof.
Roof access and protecting the roof
Reaching the chimney top means crossing part of the roof. Roof coverings differ in how well they take foot traffic, and some need careful stepping or boards to spread the load. We look at the roof around the chimney before climbing and plan the access to avoid damage.
If you know of loose or fragile areas, or a recent roof repair, tell us. We note the roof condition near the chimney in the findings. Where we see roof damage that is not ours to fix, we say so plainly, so you can call a roofer with a clear description.
If you have already bought a cap
Some people buy a cap before calling us. We are happy to look at it. The questions are the same as for any cap. It has to fit the flue, suit the chimney type and meet the code, plus the listing on a factory-built chimney.
Bring the box or the product details to the visit. We tell you whether the cap suits your chimney, and if it does not, we explain why and suggest what would. Any work we quote around it is written line by line, so you can see exactly what you are paying for.
Keeping unlike metals apart near the coast
Where two unlike metals touch, salt-laden moisture speeds up the reaction between them. A stainless cap on galvanized fasteners, or copper touching a galvanized chase, can leave one metal corroding much faster than expected. The effect is worst when the metal that corrodes is a small part, such as a fastener, set against a large surface of the other.
Near the coast, we pay particular attention to what the cap will touch. We match fasteners to the cap and look at the flashing and any chase metal nearby. If a mix of metals cannot be avoided, we explain how the parts are kept apart and what to watch for on later visits.
Included in your chimney cap visit in Lauderdale Harbours
- Outside size of each flue tile
- Check for debris or nesting in the flue
- Listed cap for a factory-built chimney
- Crown cracks noted as a separate item
Your chimney cap questions, answered in Lauderdale Harbours
Which metal should my new chimney cap be made of?
That depends on the flue, the appliance and the exposure at your home. We name the metal on the estimate and explain the choice. Galvanized, stainless and copper caps each weather in their own way, and none of them is free of upkeep.
Can a chimney cap keep birds and animals out of the flue?
A cap with an intact screen blocks the opening animals use. It must not be fitted over an animal that is already inside. If you hear movement in the flue, tell us, so removal is handled before the top is closed.
What should I mention when I call about a cap?
Describe what you see from the ground, how the fireplace is used and whether anything else vents through the chimney. Mention recent roof work or strong storms. Those details help us plan the visit to your home in Lauderdale Harbours.
More Ways to Care for Your Fireplace
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo