Chimney crown repair and sealing for homes in Dillard Park
Our family team explains the crown condition, the proposed method and the care the new work needs.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Crown trouble you can spot without a ladder
- A crack running outward from a flue
- Dried or split caulk around the flue
- Dark streaks on the brick below the top
- Pieces missing from the crown corners
Jump to
Crown repair choices for homes in Dillard Park
Why a dry crown matters for sealing
Crown coatings are not applied to wet or saturated concrete. The product data also warns against application when rain is expected soon, unless the work is protected with sheeting. Moisture under a fresh membrane can stop it bonding.
We plan coating work for a dry spell and check the surface on the day. If showers move in, we cover the crown or stop and return. That can feel slow, but it protects the result you are paying for. We tell you about any change of date.
A gap between the crown and the brick
Sometimes the crown separates from the top course of brick. A dark line opens along the joint, or the crown rocks slightly when pressed. Water can then run under the crown and into the wall.
The gap may come from failed bedding mortar, movement or loose brick below. We look at which one it is before proposing work. A crown that is sound but loose may be reset. A crown sitting on loose brick needs the masonry addressed first, which is priced as its own item.
Comparing chimney crown estimates fairly
Crown estimates can describe very different jobs under the same name. One may mean a coating, another a patch and another a new crown. Comparing prices only makes sense when the scopes match.
Ask each contractor how they handle slope, overhang, drip edge and the bond break at the flue. Ask what happens to loose concrete and what product is used. Our estimate answers those questions in writing, so you can compare it line by line with any other proposal.
Keeping the flue sealant joint in good order
The sealant joint at each flue is often the first part of a crown to wear. Brick industry maintenance guidance expects sealants to need replacing well before the masonry around them. A split or hardened bead lets water run between liner and crown.
During maintenance visits we check that joint on every flue. Failed sealant is cut out, the joint is cleaned and primed, and a new bead goes in over backer material. It is a small job that protects the larger work of the crown.
Before you approve crown work in Dillard Park
- Overhang and drip edge check
- Formwork for a cast-in-place crown
- Bond-break layer under new concrete
- Cap removal and reinstallation
Chimney crown questions we hear
Can you repair the crown without removing the chimney cap?
Sometimes a coating can be applied around the cap fixings. A new crown usually means taking the cap off and setting it back afterwards. We explain whether the cap can be reused or whether its condition makes it a separate item.
Is a mortar wash on top of my chimney the same as a crown?
It sits in the same place, but a thin sloped mortar topping is not built like a formed crown. Brick industry guidance warns that thin, feathered edges are more prone to deterioration. We check whether yours can be coated or should be replaced.
Do you seal the crown and the chimney brick at the same visit?
They are separate products and decisions. A crown coating treats the top surface. A water repellent for brick is considered only after cracks and joints are repaired, and it should let the masonry breathe. Each appears as its own line.
More Ways to Care for Your Fireplace
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo