
Repairing chimney water leaks in Hillsboro Pines
We trace the water back to where it enters, then repair that part rather than the stain it left.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Leak symptoms we trace in Hillsboro Pines
- Water dripping onto the damper or firebox
- Brick faces flaking or crumbling
- Grit or mortar crumbs on the hearth
- Wet attic insulation around the chimney
Jump to
What goes into tracing a chimney leak
Water soaking through brick and mortar
Brick and mortar absorb water, and open or eroded joints let in more. In long rain a chimney can take in enough water for it to travel through the wall and appear inside. The inside face of a chimney breast may feel damp or show a stain after heavy weather.
We look for eroded joints, cracked brick and flaking faces on the outside of the stack. Where the masonry is the path, the estimate lists the specific masonry repairs first. A water-repellent treatment may come after them, but it is not a substitute for rebuilding what is missing.
Water streaming down the brick face
A chimney top that sheds water off its edges keeps the brick below drier. Brick industry guidance describes crowns with an overhang and a drip so water falls clear of the face. Where the top is flush or cracked at the edge, water runs down the brick and soaks in.
Dark streaks on the brick below the top after rain can be a sign of this. We check how the top sheds water and where the face stays wettest. If the top is the reason the brick is soaking, its repair is listed first, ahead of any masonry work lower down.
Damp low on an outside chimney
Dampness at the base of an outside chimney may not come from the top at all. Splash from the ground, soil piled against the brick or water pooling at the foundation can wet the masonry from below.
We look at the ground around the base, the grading and any planting beds against the brick. If water is coming from below, the findings say so, and the answer may be as simple as moving soil or mulch. Roof-level repairs would not help a problem that starts at the ground.
Confirming the repair worked
After the repair, the real confirmation is weather. The next heavy rain, especially with wind from the direction that used to cause trouble, tells you whether the path is closed. Check the pencil marks, the attic and the fireplace.
In some cases a hose water test after the repair helps confirm it sooner, when the job calls for it. We explain whether that makes sense for your chimney. If water appears again, tell us, and we will start from the repaired part and work outward.
Scope notes for a chimney leak
- Symptom history and leak log review
- Cap and flue opening at the top
- Firebox floor and hearth
- Written record of the completed repair
Questions about chimney leak repair
What if the water is not coming from the chimney at all?
Then we tell you, explain what we saw and suggest which trade to call. Plumbing vents, skylights, attic lines and roofing near the chimney can all send water to the same spot. You should not pay for chimney work that would not stop it.
Does a leak need fixing if nobody uses the fireplace?
Yes. Rain getting into any chimney can damage the masonry, rust the damper and stain the walls, whether or not the fireplace is used. Unused chimneys tend to be checked late, so leaks there can run for a long time.
Can someone come out while the leak is actually happening?
Tell us when you call that the leak is active, and we arrange the visit as soon as the schedule allows. An active leak shows its path more clearly. If it dries out first, your notes and pencil marks help fill the gap.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
