Listed chimney liners installed in Riverland Village
Tell us what burns at the bottom of the flue, and we plan a liner that suits it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that a flue needs relining in Riverland Village
- No lining visible from the chimney top
- A crushed or kinked liner section
- Two appliances sharing one chimney
- A stale odor drifting from the flue
Jump to
Chimney liner installation, from sizing to cap
Appliances that need their own vent system
Some appliances are designed to push their flue gases out under pressure, or to condense them. The chimney liner standard's scope excludes those types, and their manuals specify the vent systems they need. A chimney liner is not a substitute.
If your appliance is one of these, relining may not be the answer at all. We explain what the manual calls for and whether any of it is work we do. Knowing this before an estimate avoids paying for a liner the appliance cannot use, and it keeps the conversation on the right equipment.
Factory-built chimneys are not relined the same way
A factory-built metal chimney is a listed assembly of its own. Its pipe, spacers and top parts come from one manufacturer and follow that listing. It is not a masonry chimney waiting for a liner.
If your fireplace uses a factory-built chimney, relining in the masonry sense does not apply. Damaged parts are replaced with the parts the maker specifies. We explain which kind of chimney you have at the start, so the right service handles it and the estimate describes the right work. The two kinds can look alike from the roof, so we check from below as well.
Deposits trapped behind a failed lining
When a clay lining cracks or its joints open, soot and deposits can collect in the gaps behind it. A new liner inside that passage leaves those deposits where they are unless they are removed first. That is one reason liner makers ask for thorough cleaning.
We explain what the cleaning can reach and what it cannot. If the gaps are significant, that affects whether the old lining should be removed. The estimate states the preparation, so you know what surrounds the new pipe once it is in.
Sealing the wall opening around a tee
When the liner connects through the chimney wall, the gap around the tee branch has to be closed. Liner manuals describe the grout or mortar and the trim used at that opening. A loose opening can leak air or flue gases into the room.
We finish the wall opening the way the system's instructions describe. The estimate states whether the opening needs enlarging or repair first. The room side is cleaned when the connection is complete, and the trim is left square to the wall. A gap left open would defeat the purpose of the tee.
What our liner assessment covers
- Insulation where the listing requires it
- Unused flue closure as a separate item
- Written record of the liner installed
- Concealed sections named in the findings
Questions to settle before relining
What happens to my damper when the liner is installed?
If the liner runs down to an appliance, the damper plate or frame may have to come out for it to pass. The estimate says whether the damper stays or goes, and any damper repair is priced separately from the liner.
What should I have ready for the free inspection?
The appliance make and model, its manual if you have it, and any earlier inspection wording about the lining. Old invoices for chimney work help too. If you cannot find these, we locate the model label during the visit.
Do you install liners for open fireplaces as well as appliances?
Yes. For an open masonry fireplace, the code sizes the flue against the fireplace opening, so the calculation differs from an appliance. We explain which rule set the size in the estimate, along with how the liner leaves the smoke chamber.
More Ways to Care for Your Fireplace
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo