Skip to content
(645) 465-4171

Chimney masonry assessed and repaired in Hillsboro Beach

Brick and mortar repairs with debris hauled away and any open work covered at the end of each day.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run
Call Now (645) 465-4171 Book Online

Masonry trouble worth pointing out

  • Stepped cracks along the mortar joints
  • Brick chips or sand on the roof
  • Caulk smeared over cracked joints
  • Paint peeling off chimney brick
Jump to

Chimney masonry from the roof line down

Sand and chips gathering on the roof

Grit, sand or small brick chips can gather on the roof around the chimney or in the gutters below it. They are a sign that mortar or brick faces are eroding. The debris is the chimney wearing away a little at a time.

If some has fallen where you can reach it from the ground, collect a small sample in a bag and keep it for the visit. Please do not climb onto the roof to gather it. The color and texture help us tell eroding mortar from broken brick and guide the repair.

Paint on chimney brick

Paint on exterior brick can look tidy, but it can also hide cracks and hold moisture in the masonry. When water cannot dry outward, paint may blister or peel, sometimes taking the brick face with it.

We look at where the paint is failing and what lies underneath. A patch of peeling paint over a damp area often points to a water source that needs repair. Whether to remove, renew or leave the paint is a separate choice, priced apart from the masonry work.

Full mortar joints resist water

When bricks are laid or relaid, the joints between them should be filled solid. The brick industry's guidance on water resistance treats full bed and head joints as essential, because gaps inside a joint give water a path into the wall.

When we relay loose courses or set replacement bricks, we butter the surfaces fully and point around each unit. That detail is not visible once the work is finished. It is listed on the estimate as part of the method, so you know how the new masonry was laid.

Repair the water path, then the masonry

Masonry repairs last longer when the water that damaged the brick has already been stopped. A cracked crown, a failed cap or a loose flashing edge should be dealt with in the same project, before or alongside the masonry.

We set out the order on the estimate: water entry first, then the brick and mortar, then any optional surface treatment once everything has dried. Some steps can share a visit, and some must wait for curing. The order is explained so you can see why one item comes before another.

What your chimney mason prices

  • Crack pattern mapped before repair
  • Water source traced before masonry work
  • Cleanup of mortar smears on brick
  • Anchor holes from old brackets filled

Chimney masonry questions asked in Hillsboro Beach

Why did an earlier masonry repair on my chimney crack again?

Common reasons are water still reaching the masonry, continued movement or a repair mortar harder than the brick. We look for the reason before repeating anything, so the new repair addresses it.

Should the brick be sealed after the masonry repair?

Only if it helps your chimney. A vapor-permeable water repellent can be applied once repairs are complete and dry. It is a separate option on the estimate, not a replacement for the repair itself.

Will masonry work leave a mess around the house?

We protect the areas below the chimney, clean up as we go and haul the debris away at the end. Mortar smears on the brick are cleaned before we leave.

More Ways to Care for Your Fireplace

More about chimney masonry repairEvery service in Hillsboro Beach

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With