Skip to content
(645) 465-4171

Chimney masonry assessed and repaired in Lauderdale Lakes

Masonry repairs that respect the brick you keep, with samples shown where appearance matters.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run

Masonry trouble worth pointing out

  • Dark damp patches that stay after rain
  • White deposits spreading across the brick
  • Stains on the attic side of the chimney
  • Brick dust on the patio below
Jump to

Masonry repairs for chimneys in Lauderdale Lakes

Cracks near the top of the stack

Cracks that open near the top courses can come from several places. Water from a failing crown soaks the top bricks. A crown cast tight against the flue lining can push on the masonry as the two move differently. Metal fixed into the top can rust and swell.

We look at the crown, the flue lining where it meets the top and any metal set into the masonry before deciding on a repair. Resetting the top courses without dealing with the cause would put new mortar in the same position as the old.

Mortar is chosen, not simply mixed

Masonry mortar comes in standard types defined by ASTM C270, from stronger to weaker mixes. Each suits different brick and different exposure. The brick industry's guidance on mortar selection explains how to match the type to the job.

On the estimate, we describe the mortar in plain terms rather than by a type letter alone. It is suited to your brick, no harder than it, and matched in color and finish. Ask us the reasons behind the choice and we will explain them.

Watching the repaired masonry afterwards

After the repair, watch the areas that showed damage before, especially after heavy rain. Dry joints, no new sand on the roof and no fresh stains inside are good signs that the masonry is shedding water again.

If something seems wrong, let us know which face and after what weather. Our notes from the job show the exact areas repaired, so a fresh fault can be told apart from the original one. We would rather hear about a concern early than find it grown at the next maintenance visit.

Hollow spots behind a sound face

A chimney face can look sound while the mortar behind it has washed out. Tapping or probing the joints sometimes reveals hollow spots, loose sand or voids where water has carried mortar away.

Those voids let water move through the chimney and weaken the masonry. When we find them, we fill them as part of the repair rather than pointing only the surface. The estimate notes the areas with voids, so the hidden work is visible on paper and can be checked against the finished job.

Chimney brick repair, item by item

  • Loose top courses taken down and relaid
  • Shoulder surfaces reshaped to shed water
  • Attic-side masonry checked where accessible
  • Curing care for fresh mortar

Brick and mortar repair questions

Do you replace single bricks or whole sections?

Both, depending on the damage. A few broken units can be cut out and replaced. When loose or damaged brick runs through several courses, relaying that section is usually the sounder repair.

Is there a warranty on chimney masonry repairs?

Our workmanship warranty covers the masonry repairs we agreed and completed. The estimate and the written record name the repaired areas, so it is clear what the warranty stands behind.

Why do you ask about earlier repairs to the chimney?

Earlier work explains a lot. A patch in hard mortar, sealant over cracks or a repair that failed quickly all change what we look for and how the new repair should be done.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With