
Tuckpointing the chimney on your home in Brickell Key
Say yes before 72 hours pass from your free inspection, and save 10% on the joint work.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When chimney joints start to give way
- Earlier repointing popping out in strips
- Damp brick inside the attic by the chimney
- Thin mortar smeared over old joints
- Joint profile worn flat or recessed
Jump to
Choosing mortar for a chimney repoint
Clearing thin slivers of old mortar
After raking, thin slivers of old mortar can cling to the brick edges. Brick industry guidance says they must come off so the new mortar bonds to brick, not to a loose film. A sliver left in place can become a crack line later.
We check the edges of each raked joint before any new mortar goes in. Slivers are removed without chipping the brick. It is a small step that is easy to skip. It is also hard to spot once the joints are full, which is why the estimate mentions it.
Stone chimneys follow a different repair
Natural stone and manufactured stone veneer often have wider, more irregular joints than brick, and different preparation. Repointing them is part of stone chimney repair, which has its own methods and materials.
If your chimney is stone, we assess its joints under that service. If it combines brick and stone, each part is treated with the method that suits it and listed separately. That keeps the brick tuckpointing estimate limited to brick joints, where its mortar and methods apply. Stone work is described with its own materials and priced on its own line.
Details to share before a tuckpointing visit
A few details help us plan. Tell us which side of the chimney looks worst, whether you have seen grit or mortar pieces and whether water shows inside after rain. Mention any earlier repointing or coatings you know about.
Describe how the roof can be reached and whether an appliance vents into the chimney. You do not need exact answers. A rough history points us to the right faces and saves time during the free inspection. Anything you remember about past repairs is useful.
Chimney tuckpointing for homes in Brickell Key
Chimney tuckpointing for homes in Brickell Key follows the same order on every job. We look for the water source, test the joints, choose a mortar that suits the brick and mark the areas that need work. You see all of that before any raking starts.
The work itself is careful and unhurried. Joints are raked to sound depth, filled in layers and tooled to shed water. When we finish, the old mortar is gone, the chimney is clean and you have a written record of the areas we renewed.
Repointing work we price area by area
- Curing care for the new joints
- Plant growth cut back from the joints
- Access plan for the stack above the roof
- Mortar strength kept below the brick
What people ask about chimney mortar
How long does new mortar take to cure?
Mortar hardens gradually and keeps gaining strength after it looks set. We keep new joints damp and shaded as needed and tell you what to avoid while it cures, such as washing the brick or using cleaners on it.
Can you repoint a chimney that has stucco over the brick?
Stucco hides the joints, so there is nothing to repoint from outside. Cracked or loose stucco belongs to stucco repair. If bare brick shows above the roofline, we can assess those joints as a separate area.
Can repointing be done safely on a hot day?
Yes, with care. Mortar that dries too fast bonds poorly, so we keep joints damp and shaded and may start earlier in the day. We plan around the conditions rather than rushing mortar onto a hot wall.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
