Repointing chimney brickwork with matched mortar in Leisure City
If joint work alone will not fix the problem, we explain what else the chimney needs.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the chimney joints need repointing
- Sandy grit at the base of the chimney
- Hairline cracks running along the joints
- Earlier repointing popping out in strips
- Mortar pieces on the roof around the stack
Jump to
Tuckpointing choices we talk through with you
Brushing off excess mortar with soft bristles
Some mortar lands on the brick faces next to the joints as the work goes on. Federal preservation guidance recommends removing it with a natural bristle or nylon brush once it has stiffened, and never with a metal brush. Metal bristles can scratch the brick face.
We brush the faces as each section is tooled, before any smear hardens. Hardened spots are eased off gently rather than scraped hard. The aim is clean brick around crisp joints, without harsh cleaning that would damage the surface.
Our warranty on the joints we repoint
Our workmanship warranty applies to the joints repointed under the scope you approved. It covers the raking, filling, tooling and curing care we carried out on those areas.
Should a joint crack or loosen afterwards, phone us with its location and when you noticed it. We check it against the areas listed in your written record. The trouble may trace back to a part outside the joint work, such as the crown or the flashing. In that case we name the part and treat it as its own item, with its own explanation and price.
What changes the size of a repointing job
Repointing jobs vary a great deal. How many faces are involved and how deep the failure runs both change the work. So do the hardness of the old mortar and what it takes to reach the stack above the roof. A sample area adds a step too.
We tell you which of these shape your job. Each area is priced upfront on the estimate. Should the work grow once raking begins, it stops at that point and we talk it through with you before anything extra goes ahead.
One chimney face worse than the others
One face of a chimney can show far more joint wear than the rest. That face may take more rain, dry more slowly or sit below a failing part of the crown or cap. The pattern is a clue.
We compare the faces during the inspection and look for what makes the worst one different. The repointing may focus on that face, and the cause above it may need its own repair. We explain both, so the new joints are not worn down the same way.
Your chimney mortar repair scope in writing
- Raking to an even, sound depth
- Joint dampening before new mortar
- Workmanship warranty on the agreed joints
- Mortar strength kept below the brick
What people ask about chimney mortar
How long does new mortar take to cure?
Mortar hardens gradually and keeps gaining strength after it looks set. We keep new joints damp and shaded as needed and tell you what to avoid while it cures, such as washing the brick or using cleaners on it.
How does the 72-hour window work on repointing?
If you approve the repointing, or anything else on the estimate, before 72 hours have gone by since your free inspection, we take 10% off. The clock starts at your own visit.
Does the workmanship warranty cover tuckpointing in Leisure City?
Yes. The joints we renew under the agreed scope carry our workmanship warranty. The written record lists the faces and areas repointed, which helps if you notice anything about the chimney later on.
More Ways to Care for Your Fireplace
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo